Spruce 3-Layer Fineline Panel Spruce Fineline panels are structured like 3-layer solid wood panels. Both faces consist of laminated veneer lumber with vertical, black glue joints. The result is a unique, finely lined and decorative surface. The construction of the panel is protected by a design patent. Decorative Spruce 3-S Fine- line panels are used in fur- leaving the factory warehouse nonload bearing panel in interiors, such as wall and ceiling claddings, staircases, turally protected outdoor use in exhibition and shop fitting. classification SWP/3 is possible after appropriate protection. Formaldehyde Emission Class E1 (formal-dehyde tested at ≤ 0.07 ppm according to EN 717-1) Quality: Both faces, joint – tight, sound (closed) surfaces, sound black knots permitted; calibrated and finely sanded with sanding belt abrasive grit K 60 TILLY Holzindustrie GmbH Krappfelder Straße 27, 9330 Althofen/Austria tel.: +43 4262 2143, fax: +43 4262 4144 [email protected], www.tilly.at

BVH St. Benedikt, Macro Architekten München Spruce core layer Veneer layer thickness Weight / square meter mA Water vapor diffusion resist. factor µ Airborne sound insulation R Sound absorbing coefficient 250-500 Hz Sound absorbing coefficient 1000-2000 Hz Class reaction to fire Specific burning rate β0,p,t TILLY Holzindustrie GmbH Krappfelder Straße 27, 9330 Althofen/Austria tel.: +43 4262 2143, fax: +43 4262 4144 [email protected], www.tilly.at