PRODUCT DATA SHEET 01.04.2014 (Previous date 20.08.2013) A water-borne one-component, polyacrylate exterior topcoat. Ultra Pro belongs to the Tikkurila ProHouse consept. A topcoat which does not need a separate primer. Contains alkyd for improved adhesion to bare wood. Fast drying line product which has excellent stacking properties. Protects the surface against moisture, sunlight and dirt. Extremely low water absorption. Delay water penetration into wood and therefore decreases moisture cracking of wood surface. PRODUCT FEATURES Recommended wet film thickness 115-150 g/m² each layer (dry film thickness 40–50 µm). Recommended dry film thickness for two layers 80–100 µm. Can be coated with Ultra Matt paint in building site, if needed. Tested according to the standard EN 927-5. Forms a fast drying and elastic film with low water permeability properties. 2 x Ultra Pro provides excellent protection against water penetration, and thus suppresses cracking of timber by preventing water uptake also through the edges. RECOMMENDED Suitable for exterior wooden panels and claddings etc. USES TECHNICAL DATA 8 10m2/l Colour Range Clear. 8–10 m2/l when wet film thickness is about 115–150 g/m² and dry film thickness 40-50 µm. 4–5 m2/l for complete two layer system when dry film thickness is about 80–100 µm. Tikkurila Oyj • P.O. Box 53 • Kuninkaalantie 1 • FI-01301 Vantaa Finland • Tel. +358 9 857 71 • Fax. +358 9 8577 6900 VAT FI01970674 • Business Identity Code 0197067-4 • Registered Office Vantaa • e-mail: info@ti

PRODUCT DATA SHEET 01.04.2014 (Previous date 20.08.2013) Ultra Pro Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. Spraying, brushing machine or vacuum. Airless spraying application viscosity can be reached with approximately 0–2 % of thinning by volume. Nozzle tip 0.013"–0.015" is recommended to use with the pressure of 140–180 bar. Spray angle shall be chosen according to the shape of the object. Air assisted airless application viscosity can be reached with approximately 0–2 % of thinning by volume. Nozzle tip...

PRODUCT DATA SHEET 01.04.2014 (Previous date 20.08.2013) Ultra Pro Product code APPLICATION DETAILS Application conditions Preparation Priming Thinning Mixing of components Cleaning of tools 709 6201, AP-base paint, 709 6203, CP-base paint The surface to be treated has to be clean and dry. The moisture content of sawn timber has to be below 20 %. Surfaces must be free of dirt. To be used without any separate primer. Paint is recommended to be used without thinning. If needed thin with water max. 5%. Stir the paint carefully before use. Avoid flotation. Thin with water if necessary. Water or Tikkurila...