PRODUCT DATA SHEET 22.10.2012 Merit 20 DESCRIPTION PRODUCT FEATURES A two-component acid-catalyzed lacquer. A semi-matt all-round lacquer with good filling properties. RECOMMENDED Recommended for furniture, doors and other similar wooden USES surfaces. TECHNICAL DATA 10 12 Recommended spreading amounts (unthinned) dry Coverage Thinner Mixing ratio Theoretical coverage 1033 and 1027 Lacquer 100 parts by volume 005 2703 Hardener 10 parts by volume 006 2098 Airless, air assisted airless and conventional spraying. Application (+23 °C) Airless application with the viscosity 20–45 s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure 100–160 bar. Spray angle shall be chosen according to the shape of the object. Application method Air assisted airless application with the viscosity 20–45 s (DIN 4) can be reached with approximately 5–20 % of thinning. Nozzle tip 0.011"–0.015" and the nozzle pressure 40–140 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object. Conventional application with the viscosity 20–45 s (DIN 4) can be reached with approximately 5–20 % thinning. Nozzle tip 1.4–1.8 mm is recommended to be used with pressure 2–3 bar. Tikkurila Oyj • P.O. Box 53 • Kuninkaalantie 1 • FI-01301 Vantaa Finland • Tel. +358 9 857 71 • Fax. +358 9 8577 6900 VAT FI01970674 • Business Identity Code 0197067-4 • Registered Office Vantaa •

PRODUCT DATA SHEET 22.10.2012 Drying times Stacking temperature below +35ºC. Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. Solids volume Density Product code APPLICATION DETAILS Volume solids 50±2 % Weight solids 57±2 % 1,0 kg/litre 005 2704 The surface to be treated has to be clean and dry. During application and drying the temperature of the air, the surface to be treated and the lacquer has to be over 18 ºC and the relative humidity of the air below 70 %. Priming Recommended primers: Merit Sanding, Merit 20, Merit...

PRODUCT DATA SHEET 22.10.2012 Merit 20 LABELLING health and safety data sheets. A health and safety data sheet is available on according to Regulation (EC) request from Tikkurila Oyj. For industrial use only. Safety data sheet No. 1272/2008 ENVIRONMENTAL and WASTE DISPOSAL TRANSPORT The above information, based on laboratory tests and practical experience, has been proved valid at the date marked on the product data sheet. The quality of the product is ensured by our operational system, based on the requirements of ISO 9001 and ISO 14001. As a manufacturer we cannot be responsible for any damages...