Feelings Extra Durable Paint, semi-matt
2Pages

PRODUCT DATA SHEET 18.122013 (Previous date 02.072013) DESCRIPTION PRODUCT FEATURES RECOMMENDED USES Waterborne acrylate latex finishing paint for use on interior walls and ceilings. Interior painting of concrete, plaster, filler treated, brick, cardboard, chipboard and wood fibre board surfaces. Suitable for both new and previously painted surfaces. Interior walls and ceilings in premises in which high wash and wear resistance is required such as lobbies, staircases, hospital corridors, patient rooms and other surfaces which are subject to higher than normal stress. The product has an approval for indirect contact in food industry (Finnish Food Act 23/2006). KNLTAVA HIMMEA Base paints Colour Range Gloss grade Building material emission class Coverage Can sizes Thinner Application method Drying time at 23°C and 50% relative air humidity Wash resistance Wet scrub resistance Heat resistance Che mic al re s istanc e Solids volume Density S to rag e Product code APPLICATION DETAILS Application conditions Preparation Painting Cleaning of tools Maintenance instructions Maintenance treatment EU VOC 2004/42/EC-limit value HEALTH AND SAFETY A and C White and the complete Tikkurila Symphony Colour Collection Semi-matt M1 5-8 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method. 0,9 l, 2,7 l, 9 l, Water Brush, roller or spray application. Thinning: if necessary thin by up to 5% with water. Norm ally to uc h-dry in two ho urs and reco atable afte r four hours. Final hardne s s will be achieve d afte r 2-3 day s. Ve ry g o o d. Withstands also washing with cleaning detergents and disinfectants used in hospitals SFS-EN 13300 Class I, ISO 11998 85 °C (ISO 4211-2 and ISO 4211-3) Withstands solvents, e.g. white spirit Approx. 40 % 1.2 kg/l, ISO 2811 Protect from frost. 724 6001/3 The surface to be painted must be dry, the temperature of the air at least +5 °C, and the relative humidity of the air below 80 %. Unpainted surface: Remove dirt and dust from the unpainted surfaces. If necessary, fill holes and cracks with suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Feelings Universal Primer. Previously painted surface: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) according to instructions of use and let dry. Remove loose, flaking paint with a scraper. Sand hard, glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Feelings Universal Primer, if necessary. Stir Feelings Extra Durable well before use. Apply two finishing coats by brush, roller or spray. Clean tools with water immediately after use. Tikkurila Pensselipesu (Tool cleaner) is recommended for removing hardened paint. Cleanse the surfaces with neutral (pH 6 - 8) detergent using soft brush, sponge or cloth at the earliest 1 month after painting. Very dirty surfaces can be cleansed with lightly alkaline (pH 8 -10) detergent using e.g. a cleaning cloth or sponge. Rinse the surfaces carefully after c le aning. Fo llo w the dilutio n ins truc tio ns of the detergent manufac ture r. The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a soft brush or damp cleaning c lo th. Surfaces painted with Feelings Extra Durable can be repainted with same kind of waterborne paint. See Preparation. (cat A/a)30g/l(2010). The product is not classified as dangerous. A Safety Data Sheet is available on request. Safety data sheet

PRODUCT DATA SHEET 18.12.2013 (Previous date 02.07.2013) Feelings Extra Durable Paint, semi-matt LABELLING acco rding to Reg ulatio n (EC) No . 1272/20 0 8 ENVIRONMENT AL Empty cans sho uld be recycled o r dispo sed o f in acco rdance with lo cal reg ulatio ns. Liquid waste sho uld be destro yed acco rding to the and WAST E lo cal reg ulatio ns. DISPOSAL T RANSPORT The abo ve info rmatio n is no t intended to be exhaustive o r co mplete. The info rmatio n is based o n labo rato ry tests and practical experience, and it is g iven to the best o f o ur kno wledg e. The quality o f the pro duct...