video corpo

Biorid
3Pages

{{requestButtons}}

Catalog excerpts

Biorid - 1

Industrial Coatings » Products » Product categories » Functional coatings BioRid is a waterborne functional coating containing micropores, which eliminate moisture and keep the surface DESCRIPTION dry. BioRid is especially suitable for new and previously painted surfaces in conditions where protection of the paint film from mold contamination is required. BioRid is suitable for interior painting of walls and ceilings, on PRODUCT substrates of concrete, plaster, bricks, and metal. Application FEATURES on steel surfaces requires an anti-corrosion primer, to avoid discoloration or yellowing from rusty surfaces. BioRid is suitable for new and previously painted surfaces, such as in living facilities, cellars, parking garages, food RECOMMENDED industries, warehouses, and animal husbandry operations. USES BioRid is not suitable for unpainted wooden surfaces. Read the application instructions carefully before starting the painting work. Colour Range Gloss grade White Full-matt Depending on the surfaces. For effective protection the coverage should be about Coverage 1.0-1.6 m²/l (or 750-1200g/ m²). Can sizes 9 L, 18 L Thinner Water BioRid is most suitable for brush and roller application. BioRid can also be applied Application method by airless spray application. Drying time at 23°C and 50% Dry to touch after 8-12 hours, depending on film thickness. relative air humidity Chemical Resistant to cleaning detergents. resistance Solids volume Approx. 30 % Density Approx. 1.2 kg/l (ISO 2811) Tikkurila Oyj • P.O. Box 53 • Kuninkaalantie 1 • FI-01301 Vantaa Finland • Tel. +358 9 857 71 • Fax. +358 9 8577 6900 VAT FI01970674 • Business Identity Code 0197067-4 • Registered Office Vantaa • e-mail: info@tikkurila.com

Open the catalog to page 1
Biorid - 2

PRODUCT DATA SHEET 09.03.2015 BioRid Storage Product code Shelf-life: 2 years. Protect from frost. Store in a dry and cool place, protected from sunlight. Close the can carefully for future use. Open can does not withstand long term storage. 0065120 APPLICATION DETAILS Application conditions The surface to be coated must be dry, the temperature of the air and surface at least +5 °C, and the relative humidity of the air below 80 %. New surfaces: Remove dirt and dust from the unpainted surfaces. Fill the surfaces with suitable Presto or Prestonit filler, if needed. Prime porous and absorbing...

Open the catalog to page 2
Biorid - 3

PRODUCT DATA SHEET 09.03.2015 BioRid Cleaning of tools Maintenance instructions Maintenance treatment EU VOC 2004/42/ EC-limit value HEALTH AND SAFETY LABELLING according to Regulation (EC) No. 1272/2008 Remove excess coating from tools, and clean them with water. Tikkurila Tool Cleaner is recommended for removing hardened coating from tools. Avoid high-pressure cleaning. Surfaces coated with BioRid should be recoated with the same product if needed, to retain its properties. (cat A/a) 30g/l (2010) BioRid contains VOC max. 30 g/l. The product is not classified as hazardous. A Safety Data...

Open the catalog to page 3

All TIKKURILA catalogs and technical brochures

  1. Joker

    2 Pages

  2. Supi Sauna

    8 Pages

  3. Acoustics

    3 Pages

  4. Merit 20

    3 Pages

  5. Pinja Color

    3 Pages