Industrial Coatings » Products » Product categories » Functional coatings DESCRIPTION PRODUCT FEATURES A one-component water-borne, functional, noise-damping coating for airless application. Suitable to be used on interior and sheltered surfaces only. Recommended to be used on steel roofing sheets, metal surfaces in vehicles RECOMMENDED and railway cars, ventilation ducts and other metal surfaces where vibration USES and noise problem occurs. Colour Range Gloss grade Excellent acoustic damping and vibration absorbing properties. Forms very elastic and porous coating layer. Prevents from condensation. Complies with the requirements of EN13501-1, class A2-s1d0. White and grey. Matt Recommended film thickness dry Theoretical coverage Practical coverage depends on the application method, painting conditions and the shap roughness of the surface to be coated. Can sizes 18 l, 100 l. Thinner Water Application method By airless spray or when not possible by brush or roller. Tikkurila Oyj • P.O. Box 53 • Kuninkaalantie 1 • FI-01301 Vantaa Finland • Tel. +358 9 857 71 • Fax. +358 9 8577 6900 VAT FI01970674 • Business Identity Code 0197067-4 • Registered Office Vantaa • e-mail: [email protected]

PRODUCT DATA SHEET 05.03.2015 Drying times Drying and recoating times are related to the film thickness, temperature, the relative hu the air and ventilation. Special feature Solids volume Density Product code Noise damping: Tan Delta (combined) 0,116 (VTT-CR-00259-15, test report available on 50%. 1.3 kg/l 006 5129, 006 5130 APPLICATION DETAILS Application conditions All surfaces must be dry. The temperature of the ambient air and surface should not fall +10ºC during application and drying. Relative humidity should not exceed 80%. The sur temperature of the steel should remain at least 3ºC above...

PRODUCT DATA SHEET 05.03.2015 Stainless steel: Roughen the surface by grinding of sweep blasting using non-metallic ab Temaprime EE, Temacoat RM 40, Temacoat Primer, Temacoat GPL-S Primer, Rostex S Akva and Rostex Super or directly on galvanized surface. Old painted surfaces are recommended to roughen to ensure adhesion. By airless spray or when not possible by brush or roller. Mix the paint thoroughly before The paint can be thinned 0–5% by volume if necessary. Spray nozzle tip 0.035”–0.039” nozzle pressure 150–180 bar. Do not overcoat with any other type of coating as it causes loss of condensation...