STONE PRODUCT SHEET
4Pages

STONE PRODUCT SHEET Date: 11/2014 PRODUCT Description: Tierrano Stone is a water resistant lime plaster for the interior and exterior. Lime (Calciumhydroxide) and earth pigments, metal oxide pigment (Dover White and Ayers Rock). Storage advice: Store dry and cool, but free from frost. Tierrafino Stone, when dry, can be kept for 3 years. 8 standard colors can be mixed amongst each other to create new subtle shades: Dover white, Delphi white, Roman Ochre, Nassau orange, Djenné red, Ayers Rock, Iquitos green and Gomera grey. The palette of colors can be extended endlessly by mixing with Tierrafino Pigment. Due to the character of natural earth pigments used, slight variations in color may appear between batches of the same color. Check the batch numbers mentioned on labels on packaging. If you have several batch numbers, we advise to intermix these to avoid variations in color. (Example of a batch number: STL0325DO01). AREA OF APPLICATION Shiny lime plaster for sufficiently load bearing walls, floors and ceilings in the interior and exterior. Suitable for wet and dry rooms and decorative ornaments. Suitable for table tops when not used industrially. Suitable for plastering at a thickness of 5-6 mm onto stable, rough, mineral substrates like lime-cement plasters, cement plasters and base clay plaster. Tierrafino Stone is • and mucous membraneslime, it is classified as irritating to the skin, eyes • Professional/very experienced DIY resistant • Water with handyet vapour permeable Apply tools • Hardened out after 3-4 months • Difficult to repair • Shows hairline cracks in almost all cases • Maintenance only possible with pure olive oil soap (Tierrafino Soap) • Only suitable for floors when walked on with bare feet or soft shoes • Never use masking tape on fresh/old Tadelakt • Do not apply where water will form puddles on or against Stone surfaces • to avoid stains. APPLICATION Circumstances: The air- and substrate temperature must be at least 5°C. Load bearing, stable, continuously dry, absorbing, sufficiently rough to provide a mechanical key, free of dust and grease. Remove sealing coatings. Tierrafino Base is only a suitable substrate in dry areas. In wet Page 1/4

STONE PRODUCT SHEET Date: 11/2014 areas a waterproof substrate is necessary. Substrates may not warp/bend under any circumstances, to avoid structural cracks. Mixing: Add 5 l water to 12,5 kg Stone (0,4 l/1 kg). Close the bucket and let rest for 2-15 days. Just before application: empty the contents of the bucket into a plasterer’s tub or bucket. Add a small quantity of water and mix Stone to a homogeneous paste. If possible save some dry material for repairs in the future. Only use Pigment in combination with Stone Delphi White. Add a maximum of 10% Pigment when used in wet areas, with the...

STONE PRODUCT SHEET Date: 11/2014 Safety advice: Stone is irritating. Hazard symbol: Xi . Avoid contact with skin, eyes and mucous membranes. Keep away from children. Always wear gloves, safety goggles and dust mask. Rinse eyes well with water after contact. For further information consult the Stone Material Safety Data Sheet. Fully dried out Stone can be protected with Tierrafino Wax and other types of wax. Untreated surfaces are vulnerable to stains. Safety goggles, dust mask, protective gloves, plasterer’s tub, mixer, water spray, hawk, laying on trowel, wooden float, plastic trowel,...

STONE PRODUCT SHEET Date: 11/2014 SUBSTRAT E SHEET SUBSTRATE Concrete, bricks and other building blocks Level with a cement plaster suitable for the substrate with full surface reinforcement mesh and roughen to a 2-3 mm relief First layer: screw to construction and glue seams. Second layer: full surface glued and screwed onto the first. Overlap seams and glue seams. Apply Ardex P51 + 10 mm Ardex A950, full surface reinforcement mesh and roughen to a 2-3 mm relief Sheetrock, plaster-, wooden and unknown boards Apply 12,5 mm Fermacell as written above Adobe bricks, clay boards Level with min....