LISTRO PRODUCT SHEET Date: 06/2014 PRODUCT Description: Tierrano Listro is a VOC-free, natural and decorative shiny clay stucco (stucco lustro) based on clay, for walls, ceilings and wooden furniture in the interior. Clay, sand, chalk, lime, carnauba wax, cellulose binder, starch, preservative, defoamer, water softener, water. Approx. 0,25 l/m2 per coat. In most cases 2 coats (0,5 l/m2) are sufficient. Consumption is greater when applied onto rough substrates. Storage advice: Store dry and cool but free of frost. Once opened, Listro must be used within 6 weeks. 8 standard colors can be mixed amongst each other to create new subtle shades: Dover white, Delphi white, Roman Ochre, Nassau orange, Djenné red, Ayers Rock, Iquitos green and Gomera grey. The palette of colors can be extended endlessly by mixing with Tierrafino pigment. Due to the character of natural earth pigments used, slight variations in color may appear between batches of the same color. Check the batch numbers mentioned on labels on the packaging. If you have several batch numbers, we advise to intermix these to avoid variations in color. (Example of a batch number: LIL0218DO01). AREA OF APPLICATION Clay stucco suitable for prepared walls and ceilings in the interior. Only applicable in the exterior where protected from direct contact with water. Suitable for humid areas, do not apply where there is a chance of direct contact with water. Suitable for plastering on prepared substrates like base clay-, gypsum- and lime plasters, concrete and dry wall systems. • Do-It-Yourself-After-Practicing/Professional • Ready to use odor during application. odorless after drying • Mild ammonia tools • Apply with hand • Water vapour permeable regulating • Humidity- and temperature • Anti-static • Colorfast application • Drip free APPLICATION Circumstances: The air- and substrate temperature must be at least 5°C. Continuously dry, absorbing and free of dust and grease. Prepare smooth and multi colored substrates with Tierrafino Contact Fine primer. Since Listro is a thin coat, the structure of the substrate remains visable. To prepare a straight substrate, first apply Tierrafino Base, -Kalk or a gypsum plaster. Page 1/3

LISTRO PRODUCT SHEET Date: 06/2014 After stirring, Listro is ready to use. Dilute with a maximum of 5% water. Stir Listro well. Apply 0,3-0,8 mm Listro with a trowel, brush or a roller. Immediately after application the drawing/design is made with a trowel; where Listro is left slightly thicker in the first coat, it will be polished to a higher shine/depth in the second coat than where it is applied thinner. Let dry. Do not polish the first coat to a shine. Wait at least 12 hours before application of the second coat. After the first coat has dried completely, apply a thin second coat (approx....

LISTRO PRODUCT SHEET Date: 06/2014 SUBSTRAT ES SHEET SUBSTRATE Sheetrock/dry wall/plasterboard Sheetrock with fresh gypsum plaster Fresh lime plaster Concrete (smooth surface) Aquapanel Knauf Fermacell YTONG Bricks (fired clay) Masonite MDF Varnished wood (spruce) Untreated wood (sawn) Triplex/multiplex (untreated) Clay plaster finish Base clay coat Clay board Red Base clay Tadelakt Plastic Metal Carton Latex Wall paper Sandpaper Sandpaper Sandpaper X Sandpaper Sandpaper Sandpaper Description of values of adhesion and covering capacity: * ** *** **** ***** Very poor Poor Normal Good Very good...