FINISH PRODUCT SHEET
4Pages

FINISH PRODUCT SHEET Date: 06/2014 PRODUCT Description: Tierrano Finish is a decorative clay plaster for interior walls and ceilings. Coarse finish: 2 mm – 3,5 kg/m2. Smooth finish: 3 mm – 5 kg/m2. Storage advice: Tierrafino Finish, when dry, can be kept indefinitely. 8 standard colors can be mixed amongst each other to create new subtle shades: Dover white, Delphi white, Roman Ochre, Nassau orange, Djenné red, Ayers Rock, Iquitos green and Gomera grey. The palette of colors can be extended endlessly by mixing with Fix, water and Tierrafino pigment or other pigments. Due to the character of natural earth pigments used, slight variations in color may appear between batches of the same color. Check the batch numbers mentioned on labels on packaging. If you have several batch numbers, we advise to intermix these to avoid variations in color. (Example of a batch number: FIL0325DO01). AREA OF APPLICATION Decorative clay plaster for sufficiently load bearing walls and ceilings in the interior. Only applicable in the exterior where protected from direct contact with water. Suitable for humid rooms, do not apply where there is a chance of direct contact with water. Suitable for plastering at a thickness of 2–3 mm of straight and prepared substrates like base clay-, gypsum- and lime plasters, concrete and dry wall systems. • Indefinite workability • DIY/Professional onto strong absorbing substrates. in two coats • Apply with hand tools or spray machine Apply • Hardness comparable to lime plaster • Easy to repair • Water vapour permeable • Humidity- and temperature regulating • Anti-static • Shortens reverberation • Colorfast, it does not contain metal oxide pigments • Waste can be reused or disposed of in the garden • APPLICATION Circumstances: The air- and substrate temperature must be at least 5°C. Load bearing, continuously dry, absorbing, sufficiently rough to provide a mechanical key, free of dust and grease. Remove wallpaper and flaking paints. Prepare smooth substrates with Tierrafino Contact primer. Page 1/4

FINISH PRODUCT SHEET Date: 06/2014 Pre-moisten strong absorbing substrates before applying Finish to provide better adhesion and acquire a longer workability. Do not pre-moisten substrates that are treated with Tierrafino Contact. Mixing: Add 3,5 – 4 kg Finish to 1 liter water and mix until a smooth paste is achieved. If possible, save some material for future repairs. Smooth finish: Apply 3 mm Finish with a trowel, make straight with a long steel trowel and smoothen the surface with a pastic trowel. Now follow the instructions below in “Finishing”. Coarse finish: Apply 3 mm Finish with a...

FINISH PRODUCT SHEET Date: 06/2014 Protective goggles and gloves, plasterer’s tub, mixer, water spray, hawk, laying on trowel, sponge, plastic trowel, hand held brush, masking tape, fine plaster spray. ASSISTING PRODUCTS Tierrafino Contact primer, -Base clay plaster, -Kalk lime plaster, -Fix, -Wax, -Effects. SUBSTRAT ES SHEET FINISH: 1 OR 2 COATS Concrete, smooth bricks Then apply Tierrafino Contact primer 10 mm Base clay plaster Sheetrock, plaster boards Clean, cover seams with joint mesh and fill joints with filler. Then apply Tierrafino Contact primer 5 mm Base clay plaster or apply...

FINISH PRODUCT SHEET Date: 06/2014 TECHNICAL DATA Ingredients Thermal conductivity Shrinking coefficient Particle size Thermal radiation capacity Thermal capacity Damp diffusion resistance Pressure strength Balanced humidity Construction class Although this product description has been put together with utmost precision, Tierrafino will not be liable for any indirect or direct damage that may occur, by using the information offered in this product description. Tierrafino B.V. - Archangelkade 23 - 1013 BE Amsterdam - The Netherlands Tel. +3120 689 25 15 - Fax +3120 616 58 43 -...