Bathroom and kitchen
15Pages

Fixtures. First class to the finest detail. Each fixture has a truly durable body made of solid brass which is chrome-nickel plated in two layers for long-term protection against corrosion and wear. The resulting high-gloss effect is perfected through subsequent hand polishing. The fixtures are equipped with precise valve controls: Ceramic disks with a hardness similar to that of diamonds and a smaller friction surface ensure unrivalled durabilitywhile reliably regulating the flow of water. All cartridges can be easily replaced without the use of specialised tools. Solid particles in the...

Fixtures for the kitchen or laundry room. BRASS ON-WALL MOUNTED WASHSTAND FAUCET For on-wall mounting with a 3/4" connector. Swiv el-mounted spout. Neoperl jet controller (flow rate 13,5 – 15 L/min at 3 bars) and inte rated backflow preventer, S-fittings g (1/2" x 3/4", adjustability 12,5 mm) for con necting to water pipe, 2 screw rosettes. Height 18 cm, width 22 cm, projection 29 cm. Weight 1,5 kg. Order no. 175017 BRASS ON-WALL MOUNTED WASHSTAND FAUCET WITH U-SPOUT For on-wall mounting with a 3/4" connector. Swiv el-mounted spout. Neoperl jet controller (flow rate 13,5 – 15 L/min at 3...

BRASS BATH FAUCET Bath accumulator with fork for on-wall mounting. With a 1/2"connection for attaching shower hose. Neoperl jet controller (flow rate 22,8 to 25,2 L/min at 3 bars) and integrated backflow preventer. With S-fittings (1/2" x 3/4", adjustability 12,5 mm) for connecting to the water pipe, 2 screw rosettes. Height 23,5 cm, width 22 cm, projection 15,5 cm. Weight 2 kg. Order no. 173758 BRASS SHOWER FAUCET For on-wall mounting with a 1/2"connection for attaching shower hose. With integrated backflow preventer, S-fittings (1/2" x 3/4", adjustability 12,5 mm) for connecting to water...

B RASS FITTINGS FOR FREE-STANDING BATH Floor-mounted: forked unit fitting free-standing bath tubs. It is connected to the water supply underneath the floor with two solid standpipes and a solid connector. The connector has a 1/2" thread for floor-mounted installation, at the top end the water carrying flexible stainless steel hoses are screwed on. All you need to do then is to fit the standpipes fixing them with set screws guaranteeing easy assembly and exact position ing of the standpipes. The unit has an outer 1/2" thread for connecting shower hoses. It comes with Neoperl jet control and...

Brass thermostat For wall-mounting. The thermostat can either be connected to a shower hose or a large shower head with exposed rods. The shower hose is connected to the lower 1/2" external thread. The rods for the large shower head are connected to the upper outlet port with a 1/2" x 3/4" reducer. The port, which is not required, is blocked with a plug at either the top or the bottom during installation. Temperature and flow are controlled separately. The porcelain lever opens and closes the water supply; the star handle controls temperature. The temperature is pre-set at 41°C. The...

Easy to install: Wall-mounted faucet. Two concealed valves (cold and hot control) turn this wall-mounted tap into a three hole fitting. The wall-mounted faucet merely needs to be connected to the water supply using a screw-on connector (1/2"connector) which guarantees an exact faucet position above the wash basin. Plus Neoperl water jet con trol (diameter 13,5-15 l/min at 3 bars). BRASS WALL-MOUNTED FAUCET Length 18 cm. 2,6 cm Ø. Rosette 6,5 cm Ø. Weight 420 g. Order no. 179090 Length 26 cm. 2,6 cm Ø. Rosette 6,5 cm Ø. Weight 500 g. Order no. 179091 BRASS SHOWER HEAD This shower head is...

BRASS TWO-WAY DIVERTER Two-way diverter for flush-mounted fittings. The diverter has two 1/2” connectors for warm and cold water as well as two 1/2” outlets for two different “connecting fixtures” such as a wall elbow and large shower head that can be controlled by the diverter. Installation depth is adjustable. Width 7,5 cm, min. projection 8,5 cm, wall rosette 6,5 cm Ø. Weight 800 g. Order no. 100386 BRASS WALL ELBOW Wall elbow made of brass with 1/2” connection for attaching to the water supply and 1/2” connection for attaching a shower hose. The wall elbow merely needs to be connected...

BRASS SLIDE BAR WITH HAND SHOWER HOLDER A chrome-plated brass tubing slide bar with a 46,5 cm adjustable holder for shower hoses with 1/2" connector. The holder can be adjusted with the palm grip; a Teflon coating on interior of the holder ensures that it can be easily glided along the bare without scratching. Height 60 cm, projection 15 cm. Weight 1,1 kg. Delivery without hand held shower and shower hose. Order no. 173760 BRASS WALL BRACKET For on-wall mounting: The mount fits for all shower hoses with 1/2" connecting nut; the ball bearing arm can be moved in all directions. Wall rosette 7...

Perfectly still water: crystal clear out of a laminated jet. Hand shower with second Kneipp and pouring jet. The following elaborate mechanical version of our all brass shower solves a problem which from a physics point of view is not trivial at all: it is quite an achievement calming down running water to such an extent that it is free from any turbulence, aerosol mixtures and comes out absolutely still. It's even visible when you see its crystal clearness and is noticeable by the softness with which it hits the skin - as is the case with Kneipp baths and showers and sauna visits. The...

Fixtures. First class to the finest detail. Our development objective: Unostentatious sin gle-lever and two-handle fixtures for wash basins, showers, bathtubs, bidets, and sinks in classic designs. The result: These high-qual ity, moderately-priced fixtures. Delivery information: The fixtures are delivered with all accessories required for installation. Detailed installation instructions are also included. BRASS SINGLE-LEVER WASHSTAND FAUCET With drain linkage. Neoperl aerator (flow rate 13,5 – 15 l/min at 3 bars). 2 stainless steel flex tubes with 3/8” fittings for connection to the water...