hockey hockey Hockey goals Outdoor All hockey goals are supplied in sets of two, nets are not included unless otherwise stated. Portable - aluminium goals Integral weighted goals Conforms to BS EN 750 safety standards without the need for any separate anchorage. Uprights made from 75mm x 50mm x 7mm thick reinforced aluminium. Unique roller system allows easy manouverability on all synthetic surfaces. Specially designed 50.8mm dia. back tubes allow the net to hang freely. 460mm high reinforced aluminium backboard panels with red noise absorbing carpet on all inside faces. Regulation size: 3.66m x 2.14m x 1.3m OSE-H1330 Integral weighted goal nets 3mm thick green polyethylene net with 50mm banded edges and sewn in rope. Regulation size: 3.7m x 1.7m x 1.3m OSE-H1331 International regulation goal Conforms to BSEN 750 when suitably anchored. Posts are made from 50mm wide x 65mm deep x 2.5mm thick reinforced aluminium, with white polyester scratch resistant finish. Complete with back supports 38mm diameter, 2.6mm thick. Lifting handles integrated into side frames. Backboards 460mm of reinforced aluminium, faced with high impact resistance green exterior grade carpet. Stainless steel retaining rods on uprights and crossbar to ensure correct net tension. Regulation size. 3.66m x 2.13m OSE-H1332 Goals / Wheels / Nets / Backboards Portable - steel goals Premier - regulation goal Conforms to BSEN 750. Posts, 50mm x 2.0mm thick square section steel, white powder coated finish. Net rods, top and back bars are zinc plated. Similar to the Standard Regulation Hockey Goal, but with lifting handles integrated into the side frame. Regulation green backboards 460mm x 18mm thick. Regulation 3.66m x 2.13m Goal with plywood backboards OSE-H1340 Integral weighted goal Goal with composite PVC backboards OSE-H1341 Nets for premier type hockey goals Premier net, polythene, green 3.5mm thick. Regulation size. 3.7m x 2.1m x 1.2m OSE-H1362 Standard - regulation and practice goal Conforms to BSEN 750. Detachable side frame for ease of storage. Posts 50mm x 2.0mm thick square section steel, white powder coated finish. Complete with four back supports 25.4mm x 2.0mm thick and four zinc plated boad supporting rails. Regulation size 3.66m x 2.13m Integral weighted goal roller detail Goals with: Regulation backboards, painted green. 460mm x 18mm thick OSE-H1336 Practice backboards, painted white 152mm x 25mm thick OSE-H1338 Nets for standard type hockey goals International regulation goal Club net, polypropylene, black 2mm thick. Regulation size 3.7m x 2.1m x 1.2m OSE-H1366 Fixed wheels - bolt-on type Flip-over style wheel kit Cellular rubber wheels for aluminium goals. OSE-H1334 Suitable for Standard and Premier steel goals. 260mm diameter solid rubber tyre. OSE-H1342 Nets for international type hockey goals Premier net, polythene, green 3.5mm thick. Regulation size 3.7m x 2.1m/1.2m OSE-H1362 Premier regulation goal with composite backboards page 34 | 35

Folding/wheel away goal Conforms to BSEN 750. Regulation - Steel posts, 50mm x 2.0mm thick square section steel, white powder coated finish. Complete with synthetic net hooks. Supplied with 28.6mm net supports and rubber tyred nonmarking wheels. Backboards 460mm x 18mm thick, wood painted green. Regulation size. 3.66m x 2.13m OSE-H1343 Heavy duty aluminium indoor goal Composite plastic backboards 18mm solid re-constituted green PVC. 3 backboard sections, 460mm high. Fits a range of existing hockey goals. Regulation size. Set of two OSE-H1362 Nets for folding/wheel-away type hockey goals Club...