PRODUCT TECHNICAL SHEET TECHNICAL DRAWING PRODUCT FAMILY: THERMOSTATIC MIXERS - MIX SAN LINE CODE: TMTSAN100M DESCRIPTION: 1" Thermostatic mixer HYDRAULIC PERFORMANCES: Please see the Pressuer/Flow rate chart. Anti-scald function: in case of lack of cold water, the mixer automatically closes the hot water inlet, thus interrupting the water outlet to avoid possible scalds. CERTIFICATIONS: TUV system certification UNI EN ISO 9001:2008. Designed according to the main provisions of rule UNI EN 1111. ACS compliant cartridge - file n° 04 ACC LY 112. WRAS approved. Certificate n° 0918008. PRODUCT FEATURES: Thermostatic mixers adjust the water temperature at a set value, automatically mixing hot and cold water. They ensure the utmost comfort, considerable water and energy savings and prevent accidental scalds from occuring. The mixer is factory preset using 15°C cold water and 65°C hot water, at 3 bar. TMTSAN100M features 1/2" thermostatic cartridge. It allows sanitary water to be supplied at a constant temperature: a temperature not too high inhibits scale formations and corrosions. In case of lack of hot or cold water, the mixer stops the water supply immediately. It particularly suits sanitary water supplying systems, as, due to the thermostaic cartridge, it is a precise and quick device, furthermore, the scaled knob in centigrade degrees allows for an easy and intuitive use, the cleaning and replacing operations are very easy as well. Suitable to supply water to showers, bathtubs, wash basins, etc. in provate homes, schools, hospitals, sports centres etc. Law 10/91, belonging to DPR 412/93 sets the maximum temperature for centralised sanitary hot water delivery systems at 48°C with a +5°C tolerance. This thermostatic mixer complies with this regulation and can be installed at the inlet of each utilization or in the preinstalled sanitary water boxes. The knob features a red coloured blocking push button set at 38°C. Inlets and outlet feature a 1" G male connection. Installing Kit.2, to be purchased separately, the inlets and outlests will be 3/4" G female with DN20 check valves on the inlets. The mixer's inlets are furthermore provided with a seat for a Ø22 copper pipe, therefore Kit.3, consisting of n° 3 1" nuts and n. 3 Ø22 olives, Kit.4, consisting of n. 3 1" nuts, n. 3 Ø22 olives, 3/4" nuts, n. 2 shanks, n. 2 DN20 check valves, and Kit.5, consisting of n. 3 1" nuts, n. 3 Ø15 olives, n. 3 1/2" nuts, n. 3 shanks, n. 2 DN20 check valves, can be installed. The above mentioned information cannot be considered as binding. Thermomat Srl APPROVATO reserves the right to make technical and aesthetic changes without any prior notice. THERMOMAT SRL Via M. Curie, 7 - 46034 Borgo Virgilio (Mantova) ITALY Tel. + 39 0376 4473 www.thermomat.com - e-mail: info@ther

Springs - Stainless steel AISI 302 Knob - Nylon PA6 The above mentioned information cannot be considered as binding. Thermomat Srl reserves the right to make technical and aesthetic changes without any prior notice. THERMOMATSRL Via M. Curie, 7 - 46034 Borgo Virgilio (Mantova) ITALY Tel. + 39 0376 4473 www.thermomat.com - e-mail: [email protected]