FireLite PLUS BIM 3D Model Available ultraHD TECHNOLOGY Fire-Rated, Safety-Rated Glass Ceramic Fire-Rating: 20-180 Minutes FireLite Plus is a 5/16” (8 mm) thick laminated fire-rated and impact safety-rated glazing material. It is listed for use in doors, sidelites, transoms and borrowed lites. FEATURES • ultraHD® Technology for improved surface quality, clarity and color • Fire-rated for up to 180 minutes with required hose stream test • Available in two surface grades: Premium and Standard • Clear and wireless glass ceramic • Impact safety-rated-meets ANSI Z97.1 and CPSC 16 CFR1201 (Cat. I and II) • Fits in Fireframes® Designer Series from TGP, or standard fire-rated frames • Withstands thermal shock • Large sizes available • May be lightly sandblasted or etched on one side without affecting fire rating • Protects from fire and impact on both sides of the glass • May be insulated (see FireLite IGU fact sheet) • 5-year limited warranty UL Classified & Labeled Fire-Rated Hose Stream Tested Impact-Rated Positive Pressure Tested Notes: This product is not a barrier to radiant heat, as it does not meet test standards ASTM E119 or UL 263. If your jurisdiction requires a “barrier to heat” product, please contact TGP regarding Pilkington Pyrostop®. SURFACE GRADES Standard Grade - Polished for a surface quality that is comparable to alternative fire-rated ceramics marketed as having a premium finish. Premium Grade - Finish ground and polished on both surfaces to provide superior surface quality, improving overall clarity and providing a surface that is unmatched by alternative products. LISTINGS/STANDARDS Classified and labeled by Underwriters Laboratories, Inc.® and Underwriters Laboratories of Canada. File number for labeled fire-rated assemblies is R13377. Tests performed in accordance with: NFPA 80 NFPA 252 NFPA 257 TGP TECHNICAL GLASS PRODUCTS*

PLUS MAXIMUM EXPOSED AREA RATING ASSEMBLY MAX. EXPOSED AREA MAX. WIDTH OF EXPOSED GLAZING MAX. HEIGHT OF EXPOSED GLAZING DOORS (non-temp rise) DOORS (temp rise) OTHER THAN DOORS Check with frame manufacturer for maximum tested glass sizes and required stop height. Note: Individual lite sizes cannot exceed “Max. Exposed Area” shown above. SURFACE FINISH Premium Standard THICKNESS: WEIGHT: APPROX. VISIBLE TRANSMISSION: APPROX. VISIBLE REFLECTION: HARDNESS (VICKER'S SCALE): FIRE RATING: IMPACT SAFETY RATING: STC RATING: LABELING Nominal 5/16” (8 mm) overall 4 lb / ft2 (19.53 kg / m2) 85% 9% 700...

INSTALLATION FireLite Plus shall be glazed into the appropriate fire-rated framing with an approved glazing compound (closed cell PVC tape or DAP 33 putty) as supplied by the installer. For 90 minute ratings that exceed 1,393 in2 (.8987 m2), FireLite Plus shall be glazed with fire-rated glazing tape as supplied by TGP. Inspect each piece of FireLite Plus immediately before installation and eliminate any with observable edge damage or face imperfections. As with any glass produced by the “roll out” method, individual pieces of FireLite Plus may contain minimal variations in thickness. Occasionally,...