*myarchiexpo

Glass Ore

Product catalog summary

Product Overview: Glass Ore hand-cast glass bricks are designed to enhance creativity in architectural designs. They mimic the dimensions and texture of traditional masonry bricks but offer a unique aesthetic when illuminated from behind or below. Suitable for both interior and exterior applications, these bricks are ideal for artistic accents.

Applications: Glass Ore bricks can be used in borders, accents, walls, monuments, and walkways.

Specifications:

Surface Texture: Rough, except for a smooth base.
Top Surface Dimensions: 3.8" x 7.75" (97 mm x 197 mm) with a tolerance of +1 mm, -2 mm.
Bottom Surface Dimensions: 3.9" x 7.83" (99 mm x 199 mm) with a tolerance of +1 mm, -2 mm.
Thickness: 2.36" (60 mm) with a tolerance of +3 mm, -2 mm.
Density: 146 lb/ft³ (2.34 g/cm³).
Water Absorption Rate: 0.007~0.012 wt %.
Bending Strength: 18 MPa.
Compression Strength: 80 MPa.
Abrasion Resistance: 0.005~0.005 g.
Slip Resistance: Dry: 85~91 BPN, Wet: 40~42 BPN.

Additional Shape Options:

Bar: 2" x 2" x 40" (50 mm x 50 mm x 1000 mm).
Rectangle: 4" x 24" x 1.6" (100 mm x 600 mm x 40 mm).

Notes: Measurements are approximate and not guaranteed. Variations in thickness, transparency, and color tone may occur. It is recommended to request a sample brick for confirmation.

Trademark Information: Technical Glass Products and One Source. Many Solutions. are registered trademarks of Technical Glass Products.

Catalog excerpts

TRANSLUCENT GLASS BRICKS Unleash your creativity with Glass Ore hand-cast glass bricks. With the width and texture of a traditional masonry brick, Glass Ore dramatically changes the appearance of a room when lit from behind or underneath. Ideally suited for artistic accents, Glass Ore can be used in interior or exterior applications for a striking look. IDEAL for use in: Borders and accents Walls Monuments Walkways S urfaces: R ough (except base, which is smooth) Top surface dimensions: 3.8" x 7.75" (97 mm x 197 mm) Tolerance: +1 mm, -2 mm bottom surface dimensions: 3.9" x 7.83" (99 mm x 199 mm) Tolerance: +1 mm, -2 mm t hickness: 2.36" (60 mm) Tolerance: +3 mm, -2 mm de nsity: 146 lb / ft3 (2.34 g / cm3) WATER ABSORPTION RATE: 0.007~0.012 (wt %) bending strength: 18 MPa compression strength: 80 MPa a brasion resista nce: 0.005~0.005 g slip resista nce: dry: 85~91 BPN wet: 40~42 BPN other shape options: bar: 2" x 2" x 40" (50 mm x 50 mm x 1000 mm) recta ngle: 4" x 24" x 1.6" (100 mm x 600 mm x 40 mm) These numerical values are measured, not guaranteed. Glass Ore bricks have individual characteristics that may differ in thickness, transparency and color tone. Actual color may differ from this representation. Please request a sample brick to confirm. © March 2009 Technical Glass Products. Technical Glass Products and One Source. Many Solutions. are registered trademarks of Technical Glass Products. tgpamerica.com 800.426.0279

Open the catalog to page 1

All TGP Architectural catalogs and technical brochures

Archived catalogs

Aquaglass
1 Page