AD 3000-6500

Product catalog summary

Technical Specifications

Models: AD 3000, 3500, 4500T, 4000, 5000
Dehumidification Capacity: Ranges from 21.1 to 37.2 Kg/h depending on the model.
Fans: Process air flow ranges from 3000 to 5000 m3/h with static pressure between 300 to 400 Pa. Reactivation air flow ranges from 900 to 1600 m3/h.
Regeneration: Electric and steam options available, with power output heating ranging from 31.1 to 55.2 KW.
Electrical Characteristics: Power supply is 400/3/50 ±5% Volt/Ph/Hz. Maximum power absorbed ranges from 30.3 to 57.5 KW.
Noise Level: Sound pressure levels range from 68 to 72 dB(A).

Principle of Operation
The dehumidifier uses two air flows: process air and regeneration air. Process air is dehumidified by passing through a silica gel rotor, while regeneration air removes absorbed moisture by heating and reversing the process.
Structure
The dehumidifier is constructed from painted galvanized steel or AISI304 steel with removable panels for maintenance.
Fans
Fans are directly coupled to motors and can be controlled by an optional frequency converter.
Rotor
The rotor is made of desiccant material, resistant to saturated air, and equipped with a belt drive system.
Regeneration Air Heating Coil
Available in electric and steam versions, with options for power modulation to increase efficiency.
Filters
Equipped with G4 filters for process and regeneration air, with higher grade filters available on request.
Control System
Includes PLC control with a touch-screen terminal for various functions, and can be integrated with remote BMS systems.
Electrical Panel
Complies with European standards, equipped with necessary switches and relays.
Versions
Multiple versions available, including standard, stainless steel frames, and versions with pivoting wheels.
Dimensions and Connections
Dimensions and connection sizes vary by model, with specific measurements provided for each.

Catalog excerpts

AIRDRY Adsorption Dehumidifiers

Open the catalog to page 1

TECHNICAL DATA TECHNICAL DATA MODEL MODEL ADAD Performances Performances Dehumidification Dehumidification Capacity Capacity * * Kg/h Kg/h Fans Fans Process Process air air flowflow m3/h m3/h Static Static pressure pressure Pa Pa FanFan nominal nominal power power KWKW Reactivation Reactivation air air flowflow m3/h m3/h Static Static pressure pressure Pa Pa FanFan nominal nominal power power KWKW Drive Drive Motor Motor Nominal Nominal power power W W Regeneration Regeneration Regeneration Regeneration type type Installed Installed power power KWKW Regeneration Regeneration type type Power Power...

Open the catalog to page 2

Adsorption Dehumidifier PRINCIPLE OF OPERATION The dehumidifier works using two air flows; the main one is the air to be dehumidified, while a second flow - of lower flow rate - is used to regenerate the dehumidification rotor. Two fans inside the dehumidifier create these two air flows that cross the rotor in opposite directions. The air to be dehumidified, also called "process air", passes through the desiccant rotor impregnated with silica gel. Silica gel is a highly hygroscopic material that absorbs water vapour from the air. As it passes through the rotor, the air transfers its moisture...

Open the catalog to page 3

Adsorption Dehumidifier VERSIONS AD… AD…/TX AD…/TTX AD…/STC AD…/M Standard Version with external satin stainless steel frame 304 Version with steel frame completely inox304 interior and exterior satin Construction version, with pivoting wheels Handed version (Process and Regeneration airflows are reversed) AD AD Model Model Painted Paintedsteel steel frame frame Satin Satinstainless stainless steel steel frame frame 304 304 Frame Frametotally totallystainless stainless steel304 steel304and and satin satin finish finishoutside outside Construction Constructionsite site version version with with...

Open the catalog to page 4

AD 3000-6500

AD 3000-6500

Catalog excerpts

All TFT catalogs and technical brochures