Terraroc® Concrete Repair Range
8Pages

{{requestButtons}}

Catalog excerpts

Terraroc® Concrete Repair Range - 1

Concrete Repair Range Concrete Repair Products The House of Scandinavian Finishing Materials

Open the catalog to page 1
Terraroc® Concrete Repair Range - 2

Performance dry-mix products developed for use in a wide range of concrete repair applications. The Terraco Group with its Swedish roots was established in 1980 and is today a leading producer of an extensive range of environmentally friendly quality finishing products for the construction industry. Terraroc™ Concrete Repair Range is designed to repair and reface concrete. These shrinkage-compensated concrete repair compounds are produced to the strictest quality standards ensuring uncompromising performance in the most demanding applications. The Terraroc grades consist of: • Medium build...

Open the catalog to page 2
Terraroc® Concrete Repair Range - 3

Concrete Repair Range Concrete repair compounds Terraroc MBR Medium build, shrinkage compensated, concrete repair mortar for the permanent repair of concrete. • For concrete repair. • Trowel applied, but is also sprayable enabling fast repairs. • Recommended for medium-build repair work in a single application of up to: Vertical surfaces 10-50mm Overhead applications 10-30mm • Should not be applied in layers of less than 10mm. Terraroc HBR High build, polymer modified, concrete repair compound with fibre reinforcement ensuring high flexural strength. • For concrete repair. • Trowel applied,...

Open the catalog to page 3
Terraroc® Concrete Repair Range - 4

Concrete repair compounds Terraroc PMR High strength, polymer modified, and shrinkage compensated, structural repair mortar suitable for repairing all types of concrete. • For structural concrete repair. • Trowel applied, but is also sprayable enabling fast repairs. • Recommended for high-build repair work in a single application of up to: Vertical surfaces 10-50mm Overhead applications 10-30mm • Should not be applied in layers of less than 10mm. Terraroc FMR High strength, shrinkage compensated, structural repair mortar with fibre reinforcement, suitable for repairing all types of concrete....

Open the catalog to page 4
Terraroc® Concrete Repair Range - 5

Non-shrink grout Terraroc NS100 A general purpose cementitious non-shrink grout designed for narrow void grouting, flow screeds and anchoring of a wide variety of fixings. Its non-shrink and free flowing properties are ideally suited for ramming, pumping, or pouring. Terraroc NS 100 is designed for use in the following areas: • Narrowing void grouting (flowable state); • Grouting of anchor bolts for steel columns and manholes; • Installation of fencing, boundary or sign posts; • Where grouting of between 10 to 100mm is required; • Concrete floor repairs and screeds; • Precast concrete; • Machine...

Open the catalog to page 5
Terraroc® Concrete Repair Range - 6

Terraroc Concrete Repair Systems As a general guideline the following steps are taken when repairing concrete using the Terraroc Concrete Repair System for: A. Concrete repairs - Terraroc MBR, Terraroc HBR 1. Remove all defective concrete back to reinforcements. 2. Do not apply at temperatures below 5°C. 3. Treat reinforcements with Epiprime ZR. 4. The repair area should be a minimum depth of 10mm (MBR) / 15mm (HBR) 5. Avoid feather edging. 6. Thoroughly wet surface with clean water and apply a coat of Terrabond A by scrubbing it well into the surface to improve adhesion even further. 7....

Open the catalog to page 6
Terraroc® Concrete Repair Range - 7

Technical Information Technical Data Terraroc MBR Terraroc HBR Terraroc MC Terraroc PMR Terraroc FMR Terraroc FC Terraroc NS 100 Medium Build Colour Compressive Strength High Build Micro Repair Compound Structural Polymer Modified Structural Fibre Modified Finish Coat Non-shrink Grout 7 days: 18 N/mm² 7 days: 30 N/mm² 28 days: >25 N/mm² 28 days: >30 N/mm² 7 days: 45 N/mm² 7 days: 45 N/mm² 7 days: 50 N/mm² 28 days: >55 N/mm² 28 days: >44 N/mm² 28 days: >50 N/mm² 1 day: 25 N/mm² 7 days: 53.5 N/mm² 28 days: >50 N/mm² Flexural Strength 7 days: 7.3 N/mm² 28 days: >7 N/mm² Tensile Strength 1.26...

Open the catalog to page 7
Terraroc® Concrete Repair Range - 8

www.terraco.com SWEDEN • UK • IRELAND • RUSSIA • TURKEY • ALGERIA • EGYPT • SOUTH AFRICA • JORDAN • UAE • THAILAND • VIETNAM • CHINA • KOREA Please consult your nearest Terraco representative for assistance with specification and application methods. Technical Data Sheets and Material Safety Data Sheets are available from your Terraco representative or on www.terraco.com. Terraco does not warrant the accuracy of the information provided herein and all information is subject to change without notice. © All rights reserve

Open the catalog to page 8

All Terraco LLC. Ltd catalogs and technical brochures

  1. Handycoat®

    8 Pages