1. Catalogs
  2. Tensar International
  3. Tensar Foundations over Piles
video corpo
cad

Tensar Foundations over Piles

Tensar Foundations over Piles

Tensar Foundations over Piles

Product catalog summary
Introduction
The document discusses the application of Tensar Load Transfer Platforms (LTP) and tensioned membranes in construction over soft ground, emphasizing the benefits of Tensar geogrids and Basetex geotextiles in minimizing settlement.
Specifications and Design
The Tensar LTP is engineered to distribute embankment loads onto piles or vibro concrete columns (VCCs) efficiently, eliminating the need for concrete rafts or ground beams. It utilizes high-quality granular fill reinforced with Tensar biaxial grids to enhance load distribution and shear strength.
Procedures
The construction process involves installing supporting piles or VCCs, followed by the placement of 2-3 layers of Tensar biaxial grids within the granular layers. These grids interlock with the fill, providing stability and effective load distribution, thus reducing delays from consolidation settlement.
Performance and Case Studies
A case study of the Second Severn Crossing in the UK demonstrates the effectiveness of Tensar LTPs in supporting a toll plaza over compressible soils, with monitoring showing effective load distribution and minimal settlement.
Applications
Tensar LTPs are applicable in supporting concrete ground floor slabs, embankments adjacent to rigid structures, and motorway toll booth plazas. The tensioned membrane approach, using Basetex geotextiles, is suitable when granular fill is insufficient.
Support and Services
Tensar International provides design and construction support, including free application suggestions and comprehensive design and supply services, along with extensive literature and guidelines for using Tensar products in civil engineering.
Conclusion
Tensar Technology offers reliable solutions for ground stabilization and soil reinforcement, providing cost and time savings in construction projects, ensuring dependable performance in challenging ground conditions.
See more

Catalog excerpts

Tensar Foundations over Piles-2

Construction over weak ground without settlement Engineers often need to construct embankments in areas where settlement cannot be tolerated. This is especially true when the serviceability of adjacent structures would be compromised by anything other than minimal settlement. The engineer, therefore, needs to design a foundation that will provide a firm 2 Cut-away view of embankment supported over a Load Transfer Platform. Tensar Technology - proven practical solutions and the know-how to get them built Based on the unique properties of Tensar geogrids, Tensar Technology is widely adopted for...

 Open the catalog to page 2
Tensar Foundations over Piles-3

Load Transfer The inclusion of Tensar biaxial layers has been shown to distribution considerably unreinforced condition. The to mobilise the maximum granular layer and enhance Load Transfer Platform An LTP is designed such that embankment load is transferred heads via a reinforced granular series of inverted pedestals join together to provide a The geogrid within the granular beneath the pedestals and material, thereby resisting increasing its shear strength The fill material below the permanently supported by

 Open the catalog to page 3
Tensar Foundations over Piles-5

Construction Small pile caps being cast prior to constructing the Load Transfer Platform. Once the supporting piles/VCCs have been installed the simple construction process involves the inclusion of 2 or 3 layers of Tensar biaxial grids in the granular layers layer of fill between the bottom two grids, is the only deviation from standard embankment placement and compaction operations. Overlapping, or tying, of

 Open the catalog to page 5
Tensar Foundations over Piles-6

Your local distributor is: Contact Tensar International or your local distributor to receive further literature covering Tensar products and applications. Also available on request are product specifications, installation guides and specification notes. The complete range of Tensar literature consists of: • Tensar Geosynthetics in Civil Engineering A guide to the products and their applications • Ground Stabilisation Reinforcing unbound layers in roads and trafficked areas • Tensar Structural Solutions Bridge Abutments - Retaining Walls Steep Slopes • Foundations over Piles Constructing over...

 Open the catalog to page 6

All Tensar International catalogs and technical brochures

  1. Tensar HX

    1  Page

  2. Road-Technology

    12  Pages

  3. Tensar Railways

    12  Pages

  4. Tensar_TriAx_TX

    12  Pages

Archived catalogs

  1. New_Architects

    11  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.