*myarchiexpo

Catalogs
Tekno Point Italia s.r.l.
Hydronic Sysstem with Heat Pump

Hydronic Sysstem with Heat Pump

Product catalog summary

Overview
This document is a technical catalogue for the ATHENA series of air conditioners with heat pumps, focusing on their use in residential and commercial heating, cooling, and domestic hot water production. It emphasizes the hydronic system and renewable energy sources.

Specifications
The ATHENA heat pumps utilize renewable thermal energy, achieving 60% greater energy efficiency than traditional systems. They ensure comfort by transferring thermal energy using water. Key specifications include the use of eco-friendly refrigerants R290 and R32, Mitsubishi DC Inverter compressors, and DC Inverter fans. Operating temperature limits range from -25°C to 43°C.

Technology and Efficiency
The heat pumps operate on a thermodynamic cycle, with output power four times greater than absorbed power. The Coefficient of Performance (COP) measures efficiency, with higher values indicating more efficient systems. Inverter technology maintains heating capacity as outdoor temperatures drop, adjusting compressor speed to reduce electrical consumption.

Product Features
ATHENA units feature integrated electronics, a removable control unit, axial fans, a new grille design, and a recirculation pump. They allow sequential connection of up to 8 units, achieving a maximum power of 119 kW.

Environmental Impact
Using R32 and R290 gases, the ATHENA series complies with European regulations, reducing energy consumption by up to 70% and operating efficiently from -20°C to +43°C.

Performance Data
Performance data includes cooling and heating capacities, power consumption, and COP values. The ATHENA R32 series can produce technical water up to 55°C and domestic hot water up to 50°C, even at extreme temperatures.

Procedures and Installation
The ATHENA-C model supports vertical and horizontal installation, suitable for historic and prestigious buildings. It requires a direct exterior connection for air intake and exhaust, concealed by a paintable grille. The system is modular, allowing installation of the heat pump module alone or with the DHW module.

Innovative Features
Features include modularity, Plug & Play installation, Smart Life app for Wi-Fi control, ultra-quiet operation, and a compact design.

Additional Products
The ZEUS WIFI air-to-water heat pump is designed for DHW production, featuring a high-efficiency compressor and a color touch screen display, operating without electrical resistance down to -10°C.

Technical Specifications
Specifications for domestic hot water tanks include models BACS 1XL and BACS 2XL, constructed from high-quality steel with anodic protection, complying with DIN 4753-3 and UNI 10025 standards. Insulation varies by model, with energy ratings of class C.

Heating and Sanitary Water Systems
Systems are designed for heating water at 60/50°C and producing sanitary water at 10/45°C, with varying capacities and outputs.

Hybrid Storage Systems
Hybrid systems feature dual storage tanks with carbon steel coils, suitable for use with heat pumps and solar thermal connections.

Expansion Tanks
VESP expansion tanks are certified for potable water use, available in various capacities, and suitable for kettles, storage tanks, and as water hammer arrestors.

Certifications
Systems comply with international standards such as PED 2014/68/EU, WRAS, ACS, IAPMO, and NSF.

Heating Plant and Distribution
Includes manifolds, circulators, and mixing valves with electric actuators for thermal fluid transport. High-efficiency circulators offer energy savings and noise reduction.

Polymer Modular Manifolds
Designed for hydronic systems with fan coils, these manifolds ensure minimal deformation and high durability.

Hydronic Terminals
LEONARDO and GINEVRA systems integrate heating, cooling, air purification, and heat recovery, with options for remote management via Wi-Fi.

Mechanical Ventilation with Heat Recovery
High-efficiency systems designed for air purification, eliminating odors, pollen, and pollutants, with decentralized single-room recovery units.

Building Automation - ERA Control Revolution
An innovative solution for regulating indoor comfort, supporting up to 32 zones with remote management capabilities.

Specifications and Pricing
Pricing and specifications for Tekno Point products, including mandatory commissioning for optimal performance. Warranty activation requires compliance with legal regulations.

Catalog excerpts

Invisible Climate System CLIMATIZZAZIONE CON POMPA DI CALORE AIR CONDITIONERS WITH HEAT PUMP

Open the catalog to page 1

Pompe di calore - Heat pumps

Open the catalog to page 2

Pompe di calore - Heat pumps HYDRONIC SYSTEM POMPE DI CALORE PER LA PRODUZIONE DI RISCALDAMENTO, RAFFRESCAMENTO E ACQUA CALDA SANITARIA AD USO RESIDENZIALE E COMMERCIALE. HEAT PUMPS FOR RESIDENTIAL AND COMMERCIAL HEATING, COOLING AND DOMESTIC HOT WATER.

Open the catalog to page 3

Pompe di calore - Heat pumps L’ARIA E L’IRRADIAZIONE SOLARE COME FONTE DI ENERGIA AIR AND DIRECT SUNLIGHT AS A SOURCE OF ENERGY 1 U N A S C E LTA E C O L O G I C A AN ECOLOGICAL CHOICE “Rinnovabile” vuol dire una fonte illimitata di energia gratuita fuori dalla nostra casa: sfruttiamola! Le pompe di calore usano l’energia inesauribile presente nell’aria: ecco perchè la direttiva RES le identifica come sistemi che impegnano energie rinnovabili, ed ecco perchè una pompa di calore per il riscaldamento, condizionamento e ACS è la soluzione più efficiente e conveniente presente sul mercato. “Renewable”...

Open the catalog to page 4

Pompe di calore - Heat pumps INTRODUZIONE INTRODUCTION Come vediamo sotto, la potenza erogata da una pompa di calore è quattro volte superiore a quella assorbita: La pompa di calore è una macchina che sfrutta il ciclo termodinamico del fluido refrigerante, trasferendo il calore da una sorgente all’altra. In pratica, l’energia termica presente nell’aria viene sfruttata per generare capacità frigorifera o riscaldamento. The heat pump is a device that exploits the thermodynamic cycle of a refrigerant fluid transferring heat from one source to another. In practice, it harnesses the thermal energy...

Open the catalog to page 5

Pompe di calore - Heat pumps COP - Coefficient of Performance II coefficiente di prestazione COP (Coefficient of Performance) misura I’efficienza di una pompa di calore. Viene calcolato dal rapporto tra energia resa ed energia elettrica consumata. Piu la macchina e efficiente (basso consumo) piu sara alto il coefficente COP. The Coefficient of Performance (COP) measures the efficiency of a heat pump. It is calculated as the ratio of delivered energy to consumed electrical energy. The higher the COP, the more efficient the system (lower consumption). Heating power L’andamento della potenza di...

Open the catalog to page 6

Pompe di calore - Heat pumps ATHENA R32 L’ATTENZIONE PER I MINIMI PARTICOLARI ATTENTION TO THE SMALLEST DETAILS Inverter soft-start Inverter soft-start Ventilatore assiale con pale di ventilazione profilate per una circolazione ottimale Axial fan with profiled fan blades for optimal circulation Nuovo design della griglia New grille design Scambiatore / Exchanger Manometro integrato Integrated pressure gauge Sonde per accumulo tecnico e bollitore complete di cablaggio Probes for technical storage and storage tank complete with wiring SHIMGE Compressore / Compressor Pompa di ricircolo Recirculation...

Open the catalog to page 7

Pompe di calore - Heat pumps A PROPOSITO DI ATHENA-R32 | ATHENA R32 SPLIT ABOUT ATHENA R32 | ATHENA R32 SPLIT SERIES Schema di funzionamento di massima ATHENA R32 e ATHENA R32 Split Operating diagram scheme of ATHENA R32 and ATHENA R32 Split Riscaldamento a pavimento Floor heating Separatore idraulico Hydraulic Separator Unità interna Indoor unit Ingresso acqua Water inlet Unità esterna Outdoor unit Unità collegabili in sequenza Sequentially connectable units Through a BUS connection on the RS485 port of the electronic board, it is possible to connect up to 8 Athena units. The maximum achievable...

Open the catalog to page 8

Pompe di calore - Heat pumps Adatta a tutti gli edifici Perche scegliere ATHENA?Why choose ATHENA? Gas R32 - Gas R32 L’impiego di R32 nei nostri prodotti garantisce elevate performance con un impatto ambientale ridotto, in linea con quanto richiesto dalle normative. Il gas R32 infatti, rispetta le normative europee Fgas 2025. The use of R32 in our products ensures high performance with a reduced environmental impact, in compliance with regulatory requirements. Anche Tekno Point si aggiunge alla corsa per salvare il pianeta scegliendo il nuovo gas a bassissimo GWP. L'ottima notizia e che con questo...

Open the catalog to page 9

Pompe di calore - Heat pumps La pompa di calore ATHENA R32 produce acqua tecnica fino a 55°C (anche con temperatura esterna limite di -20°C) e ACS fino a 50°C. Gestione completa della temperatura quindi, attraverso l’uso di accumili di ACS e AT. Tecnologia Full DC inverter aria-acqua e microprocessore elettronico per una perfetta gestione della valvola di espansione elettronica, del compressore e del ventilatore. ATHENA R32 POMPA DI CALORE DC INVERTER ARIA-ACQUA MONOBLOCCO SPLIT DC INVERTER AIR-TO-WATER HEAT PUMP At Tekno Point, we always seek solutions that are mindful of preserving our planet....

Open the catalog to page 10

Pompe di calore - Heat pumps SPLIT DC INVERTER AIR-TO-WATER HEAT PUMP TEMP. ARIA MINIMA -25°C 13 CALDO REFRIGERANTE E FREDDO R32 Pompa di calore DC Inverter aria-acqua trivalente - DC Inverter trivalent air-water heat pump Condizioni di prova: 1. A7/W35: temperatura dell'aria esterna 7°C DB/6°C WB, temperatura di ingresso/uscita dell'acqua 300C/350C 2. A35/W7: temperatura dell'aria esterna 35°C, temperatura di ingresso/ uscita dell'acqua 120C/70C Test condition: 1. A7/W35: outdoor air temperature 7°C DB/6°C WB, water inlet/outlet temperature 30°C/35°C 2. A35/W7: outdoor air temperature 350C,...

Open the catalog to page 11

Pompe di calore - Heat pumps In Tekno Point cerchiamo sempre la soluzione più attenta a preservare il nostro pianeta, perciò, abbiamo aggiunto alla nostra linea di pompe di calore la nuova versione di ATHENA che utilizza l'ecologico R290. Oltre al bassissimo GWP=3, il nuovo gas R290 garantisce prestazioni eccezionali alla macchina permettendo ad ATHENA di scaldare l'acqua tecnica fino a 75°C (anche con temperatura esterna limite di -25°C). ATHENA R290 POMPA DI CALORE DC INVERTER ARIA-ACQUA MONOBLOCCO MONOBLOCK DC INVERTER AIR-TO-WATER HEAT PUMP NEW! GAS R290 At Tekno Point, we always seek solutions...

Open the catalog to page 12

Hydronic Sysstem with Heat Pump

Hydronic Sysstem with Heat Pump

Catalog excerpts

All Tekno Point Italia s.r.l. catalogs and technical brochures

Archived catalogs