*myarchiexpo

Catalogs
TEKNI-LED
CATALOGUE-FINAL

CATALOGUE-FINAL

Product catalog summary

Introduction
The document explores the advanced technology of high-power LEDs, marking them as the third generation of artificial lighting following candles and filament lamps. High-power LEDs are distinct from traditional LEDs, offering over 100 lumens compared to the 1 lumen of conventional indicator LEDs.

Functioning of High-Power LEDs
High-power LEDs function by passing direct current through a silicon wafer, resulting in electron friction that emits light. They are noted for their lack of UV or IR emissions, no front heat emission, low maintenance, energy efficiency, and capability for long cabling.

Product Characteristics
Key features of high-power LEDs include no UV or IR emissions, no front heat emission, low maintenance, energy efficiency, capability for long cabling, very low voltage, and constant current operation.

Comparison with Halogen Lamps
The document compares high-power LEDs with TBT halogen lamps, highlighting the importance of lumens and lux over watts for measuring light output. High-power LEDs have a luminous efficacy of 100 lumens per watt, much higher than the 15 lumens per watt of halogen bulbs.

Standards and Compliance
All lighting products comply with European standards EN 60598, and drivers comply with EN 61347-1 and other relevant standards. The document also discusses the suitability of transformers for various installations.

Technical Specifications and Product Range
Detailed specifications for various LED modules are provided, including beam angles, luminous flux, and power consumption. Information on the color rendering index (CRI) and its importance in assessing light quality is also included.

Specifications
The document outlines various LED lighting products, including spotlights, floodlights, and street lights. Key specifications include power consumption, lumen output, color temperature, and beam angles. Products are available in different configurations, such as 1W, 3W, and 6W LEDs, with options for RGB and different optics.

Procedures
Ordering procedures require specifying the LED color code by replacing 'x' in the product reference. Installation instructions emphasize using constant current drivers for high brightness LEDs, maintaining proper polarity, and ensuring adequate ventilation to prevent overheating.

Standards and Recommendations
The document recommends using drivers with a load 10-20% below the maximum indicated to ensure longevity and performance. It advises on the correct cable types and sizes for different installation lengths and highlights the need for thermal protection to prevent damage from overheating.

Key Data from Tables and Charts
Tables show the relationship between LED power, lumen output, and beam angles. Data on the illuminated surface area at various distances helps determine the appropriate product for specific lighting needs.

Critical Information
All products require a converter for operation. The maximum number of LEDs per driver depends on the LED type and voltage drop. Proper installation and connection are crucial to avoid damage and ensure optimal performance. Products are tested before shipment to ensure quality and reliability.

Conclusion
The document highlights the technological advancements in LED lighting, emphasizing their efficiency, compliance with standards, and suitability for various applications. The use of high-performance materials and innovative designs ensures optimal performance and longevity of the LED products.

Catalog excerpts

Lin© lumiere d'avcince...

Open the catalog to page 1

ei^nhueD byGAroeun DES LUMINAIRES ISSUS DE LA HAUTE TECHNOLOGIE Creation/Conception/Fabrication Frangaise

Open the catalog to page 2

éritable bouleversement dans notre quotidien, les semi-conducteurs se mettent à la lumière ! En effet, après la bougie, la lampe à incandescence, la LED de puissance est la troisième génération de lumière artificielle. Il faut bien distinguer la LED classique utilisée comme témoin sur nos appareils électroniques (1 Lumen pour les plus puissantes) et la LED de puissance que nous utilisons dans nos produits ( plus de 100 lumens ). Cette dernière nous permet d'avoir un flux lumineux suffisant pour l'application domestique. FONCTIONNEMENT D'UNE LED DE PUISSANCE Une plaquette de silicium d'un millimètre...

Open the catalog to page 3

Composants à led de puissance High power LED modules Luminaires intérieurs Indoor lighting Ruban LED Flexiluce LED strip Flexiluce

Open the catalog to page 4

Luminaires extérieurs Outdoor lighting Convertisseurs & Pièces LED driver

Open the catalog to page 5

Légendes 7 Fabrication Française Made in France Fabrication Française Tous nos produits luminaires sont conformes à la norme EN 61 598 et nos convertisseurs à la norme EN 61347-1, EN 61 347 - 2 - 13, EN 55015 : 2/A1 2001, EN 61 000 - 3 - 2 - A1/A2, EN 61 000 - 3 - 3+C. 1997 +A1 : 2000 Our lighting fitting are manufactured in compliance with the european norme EN 60598 and our drivers in compliance with the EN 61347-1, EN 61 347 - 2 - 13, EN 55015 : 2/A1 2001, EN 61 000 3 - 2 - A1/A2, EN 61 000 - 3 - 3+C. 1997 +A1 : 2000 Température ambiante d’utilisation du produit Maximum ambient temp Appareil...

Open the catalog to page 7

Comment peut-on comparer les lampes halogènes TBT avec les LED de puissance ? Paramètres de mesure Lorsque l'on parle de lumière, la puissance en Watt des lampes est généralement utilisée comme comparatif, mais cette démarche est erronée. En effet, la puissance en Watt indique l'énergie consommée ou absorbée, mais n'indique pas le rendement lumineux. Il faut considérer en fait le lumen (lm) qui est quantité de lumière émise, et le lux (lx) qui indique la quantité de lumière sur une surface déterminée. La relation entre la puissance absorbée et la lumière émise est le rendement lumineux qui s'exprime...

Open the catalog to page 8

9 How are TBT halogen lamps compared against highpower LEDs ? Measurement parameters When discussing lighting, bulb power in Watts is usually used for comparative purposes, but this approach is flawed. In fact, power in Watts indicates the energy consumed or absorbed, but does not indicate light produced. Instead, it is necessary to look at lumens (lm), which indicates the quantity of light emitted, and lux (lx) which indicates the quantity of light on a given surface. The ratio of power absorbed to light emitted is the luminous efficacy, which is expressed in lumens per Watt (lm/W); this value...

Open the catalog to page 9

Composants à led de puissance High power LED modules Série Trio 35 Série Trio 3+ Série Trio 9+ Série Trio S Série U111 Série U210 Série Trio RGB Série U115 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Cet ensemble de produits est à l’avant-garde dans la technologie des platines à Led. Pour leur réalisation on utilise des LED à très hautes performances en ce qui concerne la sélection de couleur et l’IRC. Les LED céramiques assurent une dissipation de la chaleur élevée et un flux lumineux constant pendant le temps, selon les préscriptions d’usage ENERGYSTAR “commercial”. Afin...

Open the catalog to page 11

Optique 12° / 12° beam angle Nécessite la commande d’un convertisseur Optique 25° / 25° beam angle Module à LEDs de puissance 3*1W Adaptable dans les spots encastrables pour lampes dichroïques D.35mm Optique étroit, moyen ou large Optique 40° / 40° beam angle High brightness LED spot 3*1W Suitable for being built in standard D.35mm downlight 1m Produit disponible en Kit : Module + collerette + driver Available product in Kit : Module + collerette + driver Lors de la commande, remplacer le " x " par le code couleur de la LED. When ordering, replace the «x» by the LED colou

Open the catalog to page 12

Optique 8° / 8° beam angle Nécessite la commande d’un convertisseur Accessoires et Montage Fittings and Mounting 3m Distance Ressort Spring Spot encastrable Spot ring Optique 25° / 25° beam angle Module à LEDs de puissance 3*1W Adaptables dans les collerettes pour lampes TBT, MR16 et GU10 Optique 40° / 40° beam angle High brightness LED spot 3*1W Suitable for being built in standard D.50mm downlight Produit disponible en Kit : Module + collerette + driver Available product in Kit : Module + collerette + driver Lors de la commande, remplacer le " x " par le code couleur de la LED. C W N When ordering,...

Open the catalog to page 13

Optique 8° / 8° beam angle Nécessite la commande d’un convertisseur Accessoires et Montage Fittings and Mounting 2m Spot encastrable Spot ring Ressort Spring Optique 25° / 25° beam angle Optique 40° / 40° beam angle Produit disponible en Kit : Module + collerette + driver Available product in Kit : Module + collerette + driver Module à 3 LEDs de puissance Adaptables dans les collerettes pour lampes TBT, MR16 et GU10 High brightness LED spot Suitable for being built in standard D.50mm downlight Lors de la commande, remplacer le " x " par le code couleur de la LED. C W N When ordering, replace...

Open the catalog to page 14

Surface eclairee Lux en cm \ Distance Module a 1 LED de puissance Adaptable dans les spots encastrables pour lampes dichroiques D.50mm High brightness LED spot Suitable for being built in standard D.50mm downlight JfllKk Produit disponible en Kit Module + collerette + driver Available product in Kit : Module + collerette + driver CflOgcir coding Lors de la commande, remplacer le " x " par le code couleur de la LED. When ordering, replace the «x» by the LED colour code.

Open the catalog to page 15