CURVED roof tiles Mediterranean tradition

Curved roof tiles formats Installation guide Curved roof tiles projects Note: The colour reproduction is approximate, subject to change due to the natural colours of the clays. Check finishing colours for different accessories by telephone at: +34 96 279 80 16.

STEP CELLER C-50.21 Celled 50/45 C-45.20 A special roof tile installed over battens to create channels. Ideal for dry installation. Compatible with curved tiles 50 and 45. The largest and widest curved roof tiles. They have a conical profile and are made using an extrusion process. The range of curved roof tiles which are the smallest in size. Traditional formats based on tiles customarily used in specific geographical areas. Narrower with a conical profile. Curved pressed tile ideal for decorating and covering small areas.

Technology based on the application of engobes and ceramic decoration. Unique weathered and single-colour finishes.

Glazed tiles with a high shine. Glossy and metalized finishes which prevent premature ageing, slowing the growth of mould and moss.

The choice of raw material is as important as the quality of the final product. Tejas Borja's tiles are distinguished by the use of very fine, high quality clays. The careful selection of the clays results in tiles which are both strong and stable. Through the manufacturing process we produce high-quality curved ceramic tiles in a variety of formats, colours and textures. Manufactured using sintered red clays resulting in highly resistant tiles with a low absorption capacity. Manufactured using special white clays which offer beautiful natural shades. Ideal for the Mediterranean climate. Manufactured...

Rounded edges Support nibs Curved roof tile with support nibs on its underside. Installed in pan position to form a channel: essential for ensuring the proper drainage of water from the roof. Compatible with curved tiles C-50.21 Celler® and C-45.20. Dry installation over roof battens. 1 To guarantee the roof's watertightness, both the slope and minimum overlaps must always be determined in accordance with the geographical area and location of the roof, exactly as specified in Standard UNE-136020 regarding the design and installation of ceramic tile roofs.

STEP CELLER 50/45 - FINISHES * Compatible with Centenaria® Ground & Manoir®. ** Compatible with Centenaria® Mediterrania®, Vilavella®, Edetania®, Lamalou® & Montseny. *** Compatible with Fosca & Brown. Fosca Brown *

Approximate values: If the roof tiles are installed on battens, the useful length must be calculated on site. A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to EN 1024. 1 To guarantee the roof's watertightness, both the slope and minimum overlaps must always be determined in accordance with the geographical area and location of the roof, exactly as specified in Standard UNE-136020 regarding the design and installation of ceramic tile roofs. The type of pallet will be confirmed upon order.

C-50.21 Celler® - FINISHES NATURE Shaded White NOTE: TX - roof tiles with texture. - white clay

Minimum Slope 26% Ideal for renovation projectsSuitable for any roof construction solution C-40.19 14 Approximate values: If the roof tiles are installed on battens, the useful length must be calculated on site. A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to EN 1024. 1 To guarantee the roof's watertightness, both the slope and minimum overlaps must always be determined in accordance with the geographical area and location of the roof, exactly as specified in Standard UNE-136020 regarding the design and installation of ceramic tile roofs. The type of pallet will...

Aged White Shaded White NOTE: - white clay

Approximate values: If the roof tiles are installed on battens, the useful length must be calculated on site. A tolerance of ± 2% is allowed on the dimensions of the roof tiles according to EN 1024.

Under Ridge C-40.15 Booster C-40.15 20,6 x 10,5 x 6,25 cm. 440,5 x 15 / 5,5-6 cm. L precorte 5,5 Units/lm (on monopitch) / 1 35 Kg Ventilation C-40.19 Ventilation C-40.15 Eave Closure A tolerance of ± 2% is allowed on the dimensions according to Decorative pieces EN 1024. Dimensions in centimeters. Check finishing colours Various models and sizes for different access°ries. Accessories are subject to minimum (more info available at: tejasborja.com) order and must be multiples thereof. Circular Straight Edge for curved roof tiles left (only in Red) Universal Angular Edge (on monopitch)

Circular Ridge

Curved Edge Left Curved Edge Right Universal Angular Edge (on monopitch)

Each roof must be planned taking into account where it should be built and the length of the deck, in accordance with the technical standards applicable in each territory. Pitch panel according to the roof length and the location. (according to UNE - 136020) A 26%-70% All roof tiles (pan and cover) must be fixed every 5 rows. B > 70% All pans and covers should be fixed mechanically. Installation must comply with the technical standards applicable in each territory Code of practice for design and fixing of roofs with clay roofing tiles and Tejas Borja specifications. Under-tile ventilation is...

CURVED ROOF TILES INSTALLATION 6 7 An optimal installation of C-50.21 Celler® tiles uses TALÓN 50/45 tiles in pan position to form a channel, fixing them to a batten system. The curved tiles can also be dry installed over under-tile panels (fibre cement or bitumen). *Watch our dry installation videos at www.tejasborja.com Double batten structure. Batten height 3 cm minimum. Install primary battens (L1) perpendicular to the maximum roof pitch with 50-70 cm space between them. The same spacing must be used across the roof slope. Install secondary battens (L2) to distribute the tiles taking into...

EAVE LINE RIDGE LINE HORIZONTAL FLASHING UPPER FLASHING GABLES ROOF TILE ABCEFG I JkLlS1V