Exhibit with us
*myarchiexpo  
English
  1. Catalogs
  2. tecno-ventil SpA
  3. MG
video corpo

MG

MG
1 / 8 PagesView full catalog

MG

Product catalog summary
Introduction
The document provides technical specifications and details for the MG series of circular single blade regulating dampers, designed for regulating air flow in air-conditioning systems. These dampers can be used in both rigid and flexible circular ducting.

Specifications
The MG dampers are available in zinc plated steel or stainless steel, with options for nylon or brass shaft bushes. They can be manually adjusted or fitted with a motorisable control for automated operation. The dampers come in two main versions: MG/1 (without flange) and MG/2 (with flange), with further variations in material (zinc plated or stainless steel).

Dimensions
The dampers are available in various nominal diameters ranging from 80 mm to 800 mm, with a standard length of 200 mm or 300 mm depending on the diameter.

Technical Data
The document includes detailed technical data such as effective outlet area, weight, pressure loss, and noise rating. The pressure loss and noise ratings are provided in relation to air flow rate and blade inclination angle.

Installation and Fixing
For MG/1 dampers, fixing is done using a nipple joint and self-tapping screws for rigid ducts, or clamps for flexible tubing. MG/2 dampers are fixed using bolts through the flanges.

Contact Information
For further inquiries, contact Tecno-Ventil S.p.A. at Via Parma, 2, 26016 Spino d’Adda (CR), Italy. Telephone: +39 0373.980456, Fax: +39 0373.980681, Email: [email protected].
See more

Catalog excerpts

MG-1

MG - Circular single blade regulating dampers components for air-conditioning systems

 Open the catalog to page 1
MG-3

Regulating dampers MG Circular, single blade regulating dampers Ve r s i o n s - MG/1 (in zinc plated steel without flange) - MG/2 (in zinc plated steel with flange) - MGX/1 (in stainless steel without flange) - MGX/2 (in stainless steel with flange) The MG series of circular single blade dampers has been designed to regulate the air flow rate within rigid or flexible circular ducting or at the mouth of the junction box for diffusion elements. The housing, the blade and the shaft are made in zinc plated steel or in stainless steel (by request) with shaft bushes in nylon or brass (by request)....

 Open the catalog to page 3
MG-4

Regulating dampers Housing, blade, manual or motorisable lever in zinc plated steel or stainless steel by request, bushes in nylon or brass by request, manual control lever knob in plastic. Unscrew the manual control as indicated in Figure 2 and attach the servomotor with its drive shaft as indicated in Figure 3. VER. 06/03/07 We reserve the right to make any modifications without prior notice.

 Open the catalog to page 4
MG-5

Regulating dampers Standard sizes available from stock through air flow rate nominal diameter of damper velocity relating to the effective outlet area S total pressure loss angle of inclination of the blade noise rating (ISO standard, in relation to 10-12 W) taking no account of the attenuation of the room

 Open the catalog to page 5
MG-6

Regulating dampers Fixing systems Ty p e o f f i x i n g For the MG/1 version (without a flange) the fixing can be carried out with a nipple joint and self-tapping screws for rigid circular ducts and with clamps for flexible tubing. For the MG/2 version the coupling is carried out with bolts through the flanges of the damper and the counterflanges of the duct. VER. 06/03/07 We reserve the right to make any modifications without prior notice.

 Open the catalog to page 6
MG-8

components for air-conditioning systems tecno-ventil s.p.a. Via Parma, 2 2 6 0 1 6 S p i n o d ’A d d a ( C R ) Te l . + 3 9 0 3 7 3 . 9 8 0 4 5 6 Fa x + 3 9 0 3 7 3 . 9 8 0 6 8 1 w w w. t e c n ove n t i l . c o m [email protected]

 Open the catalog to page 8

All Tecno-ventil SpA catalogs and technical brochures

  1. AX
    AX

    5  Pages

  2. GF
    GF

    10  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.