video corpo

Isolmant UnderSlim

Isolmant UnderSlim

Product catalog summary
Product Overview: The document provides technical details about Isolmant UnderSlim, a product by TECNASFALTI designed for noise abatement in flooring applications. It is composed of high-density Isolmant Special with a needle-punched fibre underside.
Specifications:
  • Thickness: Approximately 5 mm.
  • Noise Abatement: ∆Lw = 25 dB, certified according to UNI EN ISO 140/6 standards.
  • Dynamic Stiffness: 21 MN/m3.
  • Thermal Conductivity: λ = 0.0317 W/mK.
  • Roll Dimensions: 1.50 m x 50 m, covering 75 m2.
  • Density: Approximately 50 kg/m3.
Fields of Use: Recommended for creating floating floors with limited-sized screeds, particularly where cement finishing layers are less than 5 cm thick, reducing the risk of cracking while providing high soundproofing performance.
Product Features: The product is a resilient layer made of high-density, closed-cell, physically cross-linked polyethylene foam, with an embossed and silk-screen printed top and a needle-punched fibre bottom for enhanced soundproofing. It includes overlapping flaps for installation.
Warnings: This technical data sheet is not a valid specification. Users must determine the product's suitability for their intended use.
See more

Catalog excerpts

Isolmant UnderSlim-1

FLOOR RANOE NOISE ABATEMENT DYNAMIC STIFFNESS THERMAL CONDUCTIVITY ROLL DIMENSIONS This technical data sheet is not a valid specification. It is up to the user to establish whether the product is suitable for the Via dell'lndustria 12, LocaLita Francolino benessere acustico e termico Product composed of high-density Isolmant Special 2 mm, the underside covered with a special needle-punched fibre produced to calibrated specifications designed to enhance noise abatement. Position with the fibre facing downwards. Value certified in accordance with the UNI EN ISO 140/6 standards in force. Product with overlapping flaps. solmant UnderSlim is recommended for creating floating floors with limited-sized screeds. In the presence of cement finishing layers with thick- nesses of less than 5 cm, in fact, the risk of the screed cracking is very high. Isolmant UnderSlim brings together high levels of soundproofing performance (thanks to the specific fibre) and a reduced risk of cracking, thanks to the layer of high density solmant Special. Resilient layer made of high density, closed-cell, physically cross-linked polyethylene foam, printed on the top, combined with special needle-punched fibre on soundproofing performance. Position with the fibre facing downwards. Product with over- lapping flaps. Isolmant is a registered trademark of TECNASFALTI srl - © TECNASFALTI - All rights reserved - May not be reproduced in whole or in part - Applicable since /06/09 - Supersedes any and all prior catalogues

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.