video corpo

Isolmant Special

Isolmant Special

Product catalog summary
Product Overview
Isolmant Special is a resilient layer made from a new variant of closed-cell, physically cross-linked polyethylene foam. It is designed for uniform performance distribution with high resistance to compression over time, with a creep of less than 4% under 2 KPa after 11 years. The product features overlapping flaps and is available in various thicknesses (3, 5, 10, 15 mm) with a density of 30 kg/m3.
Specifications
  • Dynamic stiffness: 60 MN/m3 (5 mm version), 32 MN/m3 (10 mm version).
  • Thermal conductivity: 0.0352 W/mK.
  • Roll dimensions: 1.50 m x 50 m (75 m2 for 5 mm and 10 mm versions), 1.50 m x 100 m (150 m2 for 3.5 mm version), 1.50 m x 30 m (45 m2 for 15 mm version), 1.50 m x 25 m (37.5 m2 for 5 mm version only).
Performance
  • Noise abatement: ∆Lw = 25 dB (5 mm version), ∆Lw = 28 dB (10 mm version).
  • Loss of thickness: Less than 4% after 11 years at 2 KPa.
Applications
Isolmant Special is recommended for soundproofing horizontal partitions between storeys. It is particularly suitable for special applications requiring consistently high performance across the entire floor surface, minimizing differences in results over the long term.
Installation
Position the product with the logo visible and the embossed, silk-screen printed side facing upwards.
Warnings
This technical data sheet is not a valid specification. Users must determine the product's suitability for their intended use.
Contact Information
TECNASFALTI, Via dell’Industria 12, Località Francolino, 20080 Carpiano (Mi), Tel. +39 02 9885701, Fax +39 02 98855702, [email protected], www.isolmant.it
See more

Catalog excerpts

Isolmant Special-1

FLOOR RANOE NOISE ABATEMENT DYNAMIC STIFFNESS THERMAL CONDUCTIVITY ROLL DIMENSIONS This technical data sheet is not a valid specification. It is up to the user to establish whether the product is suitable for the bigger, more services Via dell'lndustria 12, LocaLita Francolino benessere acustico e termico A new, embossed, silk-screen printed Isolmant variant, characterised by a better quality of cellulation of the physically cross-linked polyethylene foam. Position with the embossed, silk-screen printed side facing upwards. Loss of thickness lower than 4% after 11 years (at 2KPa). solmant Special is recommended solmant for soundproofing horizon- tal partitions between storeys. The top quality of the material makes solmant Special particularly suitable for special applications or cases which require consistently high performance across the entire surface of the floor, reducing any differences in result to a minimum, particularly in the long term. Resilient layer made from a new variant of closed-cell, physically cross-linked polyethylene foam for uniform performance distribution with high resistance to compression over time (creep < U°k under 2 KPa after 11 years). Position with the logo visible. Product with overlapping Isolmant is a registered trademark of TECNASFALTI srl - © TECNASFALTI - All rights reserved - May not be reproduced in whole or in part - Applicable since /06/09 - Supersedes any and all prior catalogues

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.