FLOOR RANOE NOISE ABATEMENT DYNAMIC STIFFNESS THERMAL CONDUCTIVITY ROLL DIMENSIONS This technical data sheet is not a valid specification. It is up to the user to establish whether the product is suitable for the bigger, more services Via dell'lndustria 12, Localita Francolino benessere acustico e termico Product composed of high density Isolmant Special 2 mm combined with an aluminised, embossed film with a reflecting function on the top and a special, needle-punched fibre produced to calibrated specifications for enhanced noise abatement on the bottom. Position with the aluminised side facing upwards. Value certified in accordance with the UNI EN ISO 140/6 standards in force. Product with overlapping flaps. applications with floor heating/cooling systems. Because of its top aluminised, reflecting layer, Isolmant Radiante can screen any loss of heat downwards. This is useful mainly in low thickness applications with thin thermal panels. It should be pointed out that a resilient mat is always reguired, because thermal panels do not give Resilient layer made of high-density, closed-cell, physically cross-linked polyethylene foam, embossed and with a special needle-punched fibre on the bottom to improve soundproo- fing performance. Position with the aluminised side facing upwards. Product with overlapping flaps. Isolmant is a registered trademark of TECNASFALTI srl - © TECNASFALTI - All rights reserved - May not be reproduced in whole or in part - Applicable since /06/09 - Supersedes any and all prior catalogues