FLOOR RANOE NOISE ABATEMENT DYNAMIC STIFFNESS THERMAL CONDUCTIVITY ROLL DIMENSIONS This technical data sheet is not a valid specification. It is up to the user to establish whether the product is suitable for the Via deU'lndustria 12, LocaLita Francolino benessere acustico e termico Product composed of Isolmant 5 mm combined with a special silk-screen printed, tearproof fabric on the top and needle-punched fibre produced to calibrated specifications for enhanced noise abatement on the bottom. Position with the silk-screen printed fabric facing upwards. Product with overlapping flaps and equipped with adhesive tape to seal the solmant BiPlus is recommended whenever high levels of acoustic comfort and resistance to impact noise and tearing are required. Suitable for both single and dual layer structures, it requires screeds with a thickness of at least 5 cm. For smal- reinforce the screeds with suitable Take care when applying with "freshly"-laid ceramics. Resilient layer made of closed-cell, physically cross-linked polyethylene foam, combined with a needle- punched fibre on the bottom to enhance soundproofing performance and a special, tearproof fabric Position with the fabric facing Product with adhesive overlapping flaps. Density approx. 30 kg/m3. Isolmant is a registered trademark of TECNASFALTI srl - © TECNASFALTI - All rights reserved - May not be reproduced in whole or in part - Applicable since /06/09 - Supersedes any and all prior catalogues