Document Overview:
This technical document from Technova Spa dated July 15, 2005, provides specifications and dimensional data related to a mechanical bracket component, specifically a 'staffa' (bracket) with a closed edge ('fianco chiuso').

1. Component Description

The document focuses on a bracket used in mechanical assemblies, highlighting its structural features such as a closed edge design which likely enhances rigidity and stability.

2. Dimensional Specifications

• Maximum length: 2500 mm
• Minimum length: 900 mm
• Various dimensional parameters are listed, including values such as 85, 63, 18, 3.5, 75, 500, 120, 50, 14, 64, 20, and 5 (units presumably millimeters).
• These dimensions likely correspond to thicknesses, widths, heights, or spacing relevant to the bracket design.

3. Technical Parameters

The document includes numeric values that appear to define critical measurements or tolerances for manufacturing or assembly, ensuring the bracket meets required mechanical standards.

4. Contact and Manufacturer Information

Technova Spa
Address: Viale Europa, 13, 25036 Palazzolo s/O (Bs), Italy
Phone: ++39.030.7300792
Fax: ++39.030.7407049
Email: [email protected]
Website: www.technova.it

Summary of Key Points:

• The bracket features a closed edge design for enhanced structural integrity.
• Dimensional limits are strictly defined, with a length range between 900 mm and 2500 mm.
• Multiple precise measurements are provided to guide manufacturing and quality control.
• Manufacturer contact details are included for further technical support or inquiries.