Catalogs >
TECHNOKOLLA >
TECHNOSTUK G.G. Ver:11/12 128

TECHNOSTUK G.G. Ver:11/12 128
5Pages

Catalog excerpts

Cement-based grouting for joints 4 to 20 mm in width. Microshield system provides active protection that helps to prevent the growth of bacteria, fungi and mould, which can cause stains and deterioration of the grouting. Highly sanitizing.

Open the catalog to page 1

with Tc-Stuk with Tc-Stuk MAIN FEATURES Water repellent Optimum cleanability High degree of hardness Frost proof Abrasion resistant APPEARANCE Powder in 4 colours (see colour card at www.technokolla.com) STORAGE 12 months in dry place FIELDS OF USE - Grouting joints between all types of ceramic tiles, both indoors and outdoors. - Thanks to its special pigmentation and formula, TECHNOSTUK G.G. spreads in an optimum way and cleans off easily when dry, even from porous materials like cotto. TECHNICAL SPECIFICATIONS OF THE PRODUCT TECHNOSTUK G.G. mainly consists of high-strength cements,...

Open the catalog to page 2

RECOMMENDED ACCESSORIES LABORATORY TESTS The laboratory tests performed by Centro Ceramico of Bologna on Technokolla’s cement-based grouting compounds with MICROSHIELD SYSTEM active protection additive have established that: the bacterial survival rate is 0, while colonization by mould and fungi is inhibited. Resistance to fungal growth test in accordance with standard: BS 5980 Photo 1 shows the sample of conventional grouting that has just been inoculated by colonies of mould spores. Photo 2 shows the same sample after 14 days of incubation, with mould growth index 4 (31-70%). Rubber...

Open the catalog to page 3

AVAILABLE COLOURS 01 MANHATTAN GROUTING consumption g/m2 JOINT in mm CONSUMPTION CALCULATION FORMULA AxBx in mm WARNINGS AND RECOMMENDATIONS - do not exceed the recommended amount of water in the mixture. The mixture must never be fluid - first perform a cleanability test when using dark colours on light polished porcelain stoneware or on natural stone - if the tiles are very absorbent, it is advisable to wet the surface before grouting - never interrupt the grouting operations for more than two hours in the same room or area - do not add anything to the product that is not specified in...

Open the catalog to page 4

technostuk G.G. TECHNICAL DATA granular powder Temperature during application Water used for mixing Curing time Thermal resistance Abrasion resistance Flexural strength after dry storage Bending strength after freezing/thawing cycles Compressive strength after dry storage Compressive strength after freezing/thawing cycles Water absorption after 30 min. Water absorption after 240 min. Resistence to the growth of bacteria S% (survival): Degree of mould colonization C% (growth): TIME TO WAIT BEFORE GROUTING Floor with adhesive Floor with quick-setting adhesive Floor with dry-shake finish...

Open the catalog to page 5

TECHNOSTUK G.G. Ver:11/12 128 5Pages

Catalog excerpts

All TECHNOKOLLA catalogs and technical brochures

TECHNOSTUK G.G. Ver:11/12 128
5Pages