TECHNOSTUK 2-12 Cement-based grouting for joints 2 to 12 mm in width. Microshield system provides active protection that helps to prevent the growth of bacteria, fungi and mould, which can cause stains and deterioration of the grouting. Highly sanitizing.

with Tc-Stuk MAIN FEATURES Vast range of colours High degree of hardness Water repellent Abrasion resistant Frost proof APPEARANCE Fine powder in 12 colours (see colour card in www.technokolla.com) STORAGE 12 months in dry place FIELDS OF USE - Grouting joints between all types of ceramic tiles, both indoors and outdoors. - Grouting natural stone. - Tile laying with 2 to 12 mm joints. - Grouting in swimming pools. - Fixing on heating floors. TECHNICAL SPECIFICATIONS OF THE PRODUCT Technostuk 2-12 mainly consists of high-strength cements, mineral charges, synthetic resins and specific additives....

RECOMMENDED ACCESSORIES LABORATORY TESTS The laboratory tests performed by Centro Ceramico of Bologna on Technokolla’s cement-based grouting compounds with MICROSHIELD SYSTEM active protection additive have established that: the bacterial survival rate is 0, while colonization by mould and fungi is inhibited. Resistance to fungal growth test in accordance with standard: BS 5980 Applicator Photo 1 shows the sample of conventional grouting product that has just been inoculated by colonies of mould spores. Photo 2 shows the same sample after 14 days of incubation, with mould growth index 4 (31-70%)....

AVAILABLE COLOURS 00 WHITE GROUTING consumption g/m2 JOINT in mm CONSUMPTION CALCULATION FORMULA AxBx in mm WARNINGS AND RECOMMENDATIONS - do not exceed the recommended amount of water in the mixture - the mixture must never be fluid - first perform a cleanability test when using dark colours on light polished porcelain stoneware or on natural stone - if the tiles are very absorbent, it is advisable to wet the surface before grouting - never interrupt the grouting operations for more than two hours in the same room or area - do not add anything to the product that is not specified in this data...

technostuk 2-12 TECHNICAL DATA granular powder Temperature during application Water used for mixing Curing time Thermal resistance Abrasion resistance Flexural strength after dry storage Bending strength after freezing/thawing cycles Compressive strength after dry storage Compressive strength after freezing/thawing cycles Water absorption after 30 min. Water absorption after 240 min. Resistence to the growth of bacteria S% (survival): Degree of mould colonization C% (growth): EMICODE Emission class TIME TO WAIT BEFORE GROUTING Floor with adhesive Floor with quick-setting adhesive Floor with dry-shake...