TECHNOS Ultra-white powder adhesive for laying ceramic tiles. bonding agents and adhesives

MAIN FEATURES Monocomponent No creep Optimum workability APPEARANCE Ultra-white powder STORAGE 12 months in dry place FIELDS OF USE -- Fixing, on indoor walls and floors, small-size absorbent tiles such as: cotto, twice-fired, single-fired ceramic. SUBSTRATES Cement-based plaster, cement-lime mortar, gypsum-based plaster¹, anhydrite screeds¹, cement-based screeds, concrete. ¹ after application of PRIMER-T NATURE OF THE PRODUCT TECHNOS mainly consists of high-strength cements, selected silicon/quartz mineral charges and specific additives. For further details, ask the technical office for the...

RECOMMENDED ACCESSORIES HOW TO PREPARE THE MIXTURE Blend TECHNOS with approximately 7.9 l of clean water per bag (31±1%) until mixture is homogeneous and lump-free. It is advisable to use blender at low speed (approx. 500 rpm) as high speed will reduce the mechanical characteristics of the product. Wait 3 minutes, then stir the product briefly again before applying. The creamy paste obtained can be easily applied by trowel and possesses optimum thixotropy. WARNINGS AND RECOMMENDATIONS Do not use: -- on concrete, plasterboard, old ceramic floors, wood, vinyl flooring, metal. -- for large tiles...

technos TECHNICAL DATA Curing time Open time Adjustability time Floor tiles can be grouted Wall tiles can be grouted Creep on vertical wall Initial tensile strength Tensile strength after immersion in water ° according to standard “EN 12004” * time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION Ceramic floor and wall tiles must be fixed with class “C1T cement-based powder adhesive according to standard EN 12004”, such as TECHNOKOLLA's TECHNOS, which can be applied in layers up to 6 mm thick on cement-based...