1. Catalogs
  2. TECHNOKOLLA
  3. TECHNORAP-MC Ver:04/16 238

TECHNORAP-MC Ver:04/16 238
1 /4Pages

TECHNORAP-MC Ver:04/16 238

TECHNORAP-MC Ver:04/16 238
1 /4Pages

Catalog excerpts

TECHNORAP-MC Ver:04/16 238-1

erage: High cov re than 40% mo nal a traditio sive. adhe TECHNORAP-MC Quick setting lightened multi-consistency cement-based adhesive for fixing porcelain stoneware and natural stone in medium and large sizes. Can also be used in a single coat. bonding agents and adhesives

 Open the catalog to page 1
TECHNORAP-MC Ver:04/16 238-2

technorap-mc EN 12004 thixotropic consistency fluid consistency MAIN FEATURES Quick setting and drying Multi-consistency, can be used in both thixotropic or fluid consistencies layers up to 30 mm thick (thixotropic consistency) Highly deformable No vertical creep (thixotropic consistency) APPEARANCE White and grey powder STORAGE 6 months in dry place FIELDS OF USE -- Quick-fixing ceramic tiles of all types, even large sizes, on indoor and outdoor walls and floors. -- Quick-fixing stone materials, also those liable to staining and with a slight tendency to warping. -- Suitable for use when high...

 Open the catalog to page 2
TECHNORAP-MC Ver:04/16 238-3

OPERATIONS PRIOR TO APPLICATION Small localized hollows or gravel pockets in the case of concrete can be leveled (not more than 15 mm thick) with TECHNORAP-MC 4-6 h prior to fixing. If thicker layers are required, use GAP or GAP-R respectively 24 h and 6 h before fixing tiles. HOW TO PREPARE THE MIXTURE GREY POWDER WHITE POWDER Blend the contents of the bag of powder in a clean vessel with the quantity of water indicated above depending on the required consistency. Use blender fitted with blending tool at a low rate until mixture is smooth and lump-free. Use blender at low speed (max. 500 rpm)....

 Open the catalog to page 3
TECHNORAP-MC Ver:04/16 238-4

technorap-mc TECHNICAL DATA Curing time Pot life - Thixotropic consistency Pot life - Fluid consistency Open time Floor tiles can be grouted Wall tiles can be grouted *After 24 h (72 h tanks and swimming pools) Creep on vertical wall Initial tensile strength Tensile strength after the action of heat Tensile strength after immersion in water Bond after freezing/thawing cycles ° according to standard “EN 12004”. * these time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. EMICODE Emission class FRENCH VOC LABEL Emission...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.