■■■■■■r ^■■■■■■IHI ffflk COMPONENT! . ^|||||k High performance, quick-setting two- component adhesive for fixing large ceramic and marble tiles. Suitable for over-tiling and on heating bonding agents

MAIN FEATURES Quick-setting Two components Highly deformable Frost proof No creep Layers up to 20 mm thick APPEARANCE White or grey powder STORAGE Powder: 6 months in dry place Liquid: 12 months protected from frost and heat FIELDS OF USE -- Quick fixing ceramic tiles of all types, even large sizes, on indoor and outdoor walls and floors swimming pools or facades. -- Quick-fixing stone materials, also those liable to staining and with a slight tendency to warping. -- Suitable for use when high performances are required as the installation in industrial environments. CSTB certified product for...

RECOMMENDED ACCESSORIES OPERATIONS PRIOR TO APPLICATION Small localized hollows or gravel pockets in the case of concrete can be leveled (not more than 10 mm thick) with TECHNORAP-2 4-6 h prior to fixing. HOW TO PREPARE THE MIXTURE 437145 Blender 1200 Blend TECHNORAP-2 by mixing the powder (25 kg bag – grey powder – or 22 kg bag – white powder) with the latex (5.5 kg can) until mixture is homogeneous and lump-free. It is advisable to use blender at low speed (approx. 500 rpm) as high speed will reduce the mechanical characteristics of the product. The creamy paste obtained can be easily applied...

Curing time Open time Floor tiles can be grouted Wall tiles can be grouted *After 24 h (72 h tanks and swimming pools) Creep on vertical wall Transverse deformation Compressive strength Initial tensile strength Tensile strength after the action of heat Tensile strength after immersion in water Bond after freezing/thawing cycles ° according to standard "EN 12004". * these time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. EMICODE Emission class SPECIFICATION Ceramic floor and wall tiles must be fixed with class...