TECHNOMED White and grey powder adhesive for laying ceramic tiles. bonding agents and adhesives

MAIN FEATURES Monocomponent Optimum workability APPEARANCE White or grey powder STORAGE 12 months in dry place FIELDS OF USE - Fixing, on indoor walls and floors, small-size absorbent tiles such as: cotto, twice-fired, single-fired ceramic. SUBSTRATES Cement-based plaster, cement-lime mortar, gypsum-based plaster¹, anhydrite screeds¹, cement-based screeds, concrete. ¹ after application of PRIMER-T NATURE OF THE PRODUCT TECHNOMED mainly consists of high-strength cements, selected silicon/quartz mineral charges and specific additives. For further details, ask the technical office for the safety...

RECOMMENDED ACCESSORIES WARNINGS AND RECOMMENDATIONS Do not use: - on concrete, plasterboard, old ceramic floors, wood, vinyl flooring, metal. - on RASOLASTIK or RASOGUM - for large tiles - outdoors - at temperatures less than 5°C or more than 35°C - in coats more than 6 mm thick CONSUMPTION Trowel with square serrations Consumption data refer to sole use of a trowel on flat substrates. 437204 White rubber mallet bonding agents and adhesives

technomed TECHNICAL DATA Curing time Open time Adjustability time Floor tiles can be grouted Wall tiles can be grouted *After 14 days GREY Initial tensile strength Tensile strength after immersion in water ° according to standard “EN 12004” * time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION Ceramic floor and wall tiles must be fixed with class “C1 cement-based powder adhesive according to standard EN 12004”, such as TECHNOKOLLA's TECHNOMED, which can be applied in layers up to 6 mm thick on cement-based...