TECHNOCELL Adhesive mortar for cellular concrete blocks. Suitable for glueing and successive leveling.

MAIN FEATURES Monocomponent Frost proof Optimum workability APPEARANCE Light grey powder STORAGE 12 months in unopened pack in dry place TECHNOCELL is adhesive mortar specifically formulated for assembling cellular concrete walls. FIELDS OF USE - Bedding cellular concrete blocks. - Leveling cellular concrete walls both indoors and outdoors. SUBSTRATES Cellular concrete blocks, cement-based plaster, cement-lime mortar. NATURE OF THE PRODUCT TECHNOCELL mainly consists of high-strength cements, selected silicon/quartz mineral charges and specific additives. For further details, ask the technical...

HOW TO PREPARE THE MIXTURE Blend TECHNOCELL with approximately 6.25 l of clean water per bag (25±1%) until mixture is homogeneous and lump-free. It is advisable to use blender at low speed (approx. 500 rpm) as very high speed will reduce the mechanical characteristics of the product. Wait about 5 minutes, then stir the product briefly again and start applying. APPLICATION AS ADHESIVE Position the first row of blocks on a bed of TECHNOCELL. Apply with the special serrated trowel (ideal serration spacing is 5-6 mm) and make sure that the entire surface of the block is coated. It is very important...

TECHNICAL DATA Appearance of finished product Maximum diameter of aggregate Apparent specific mass of powder Water required for mixing Apparent specific mass of fresh mortar Consistency of fresh mortar Pot life of fresh mortar Percentage of chlorides FINAL PERFORMANCE Compressive strength after 28 days Coefficient of water vapour permeability Air content of fresh mortar Water absorption by capillarity Initial shear strength Reaction to fire Thermal conductivity (A10dry) class M5 5/20 (table value) approx. 20% < 0.7 kg/ (m2*min*°.5) 0.3 N/mm2 class A1 0.43 W/m*K (table value) APPLICATION SPECIFICATIONS...