• Ready to use
• High performance
• Highly flexible
• Optimum workability

Beige paste

12 months in a dry place at temperatures from +5 to +25°C

• Fixing homogeneous or heterogeneous PVC, fitted carpeting, tufted carpets, and cladding materials backed in latex foam, jute, and linoleum in sections.

• Cement-based screeds
• Cement-based and wood-based plaster
• Fiber cement
• Concrete
• Cement-lime mortar

RS 30 consists of acrylic resins in watery dispersion, selected mineral charges, and specific additives.

RS 30 adhesive is ready to use. Stir briefly after opening the bucket before use.

Spread adhesive on the substrate using a special serrated trowel. Wait for the adhesive to partially dry before laying the floor covering, ensuring uniform pressure to eliminate air pockets.

• Do not apply to screeds not protected against rising damp.
• Avoid use in places without windows or openings.
• Ensure walls and ceilings are dry before application.
• Do not use on non-absorbent substrates or anhydrite substrates.
• Do not add anything to the product.
• Rigid materials should be acclimatized in the room before installation.

Use fast-setting monocomponent adhesive in watery dispersion, such as TECHNOKOLLA's RS 30, for fixing specified materials.

• Open time: 25 min
• Treadable after 2-4 hours
• Surfaces ready for use after 24-48 hours
• Application temperature: 10-30°C
• Tools can be cleaned with water

• Consumption: 300/400 g/m² depending on substrate conditions and thickness applied
• 3x3 mm trowel