RASORAPID Thixotropic quick-setting and drying cementitious skimming plaster used in 2 to 20 mm layers for preparing substrates. substrate preparation

Drill/ Plaster sprayer MAIN FEATURES One-pack compound Thixotropic Optimum workability Fast setting and drying Optimum bonding-capacity Layers up to 20 mm Anti-shrinkage ASPECT Grey powder STORAGE 8 months in a dry place FIELDS OF USE - Levelling in 2 to 20 mm layers in interiors of civil or industrial buildings. Can be covered with tiles or natural stones. - Repairing substrates which can be covered with ceramic tiles or natural stone after 4-6 h. - Application in thick layers. Add 30% in weight of sand with a 1 to 3 mm grain size to the RASORAPID. The obtained mixture can be applied in layers...

RECOMMENDED ACCESORIES APPLICATION Before proceeding, if the substrate is very absorbent, i.e. substrate or plaster made of sand and cement, it is necessary to wet it before applying the product (for further details see introduction “SUBSTRATE PREPARATION”). RASORAPID should be mixed with about 5l of clean water per bag 25 kg (20 ± 1%) until a homogeneous, lump-free mixture is obtained. It is advisable to use a blender at low speed (approx. 500 rpm) as a high speed will reduce the mechanical characteristics of the product. Wait about 2 mminutes, then stir the product briefly again and start applying....

rasorapid TECHNICAL SPECIFICATIONS Grey powder Mixing water Curing time Minimum thickness Maximum thickness Laying ceramic tiles after Laying wood and resilients after Can be walked over after Compressive strength after 6 h Compressive strength after 24 h Compressive strength after 3 days Compressive strength after 28 days Bending strength after 28 days Temperatures during application Thermal resistance from * these times refer to a temperature of 23°C – 50% R.H. They become shorter with higher temperatures and longer at lower temperatures SPECIFICATION The surfaces should be levelled with a...