RASO Tixotropic cement-based thick skimming plaster, in white or grey, for the preparation of substrates. substrate preparation

Drill/ Plaster strayer Smooth trowel MAIN FEATURES One-pack compound Optimum workability Optimum bonding capacity Layers up to 10 mm thick Spreadable by a plaster layer ASPECT White or grey powder STORAGE 12 months in a dry place FIELDS OF USE - Raso can be used as civil finishing of traditional or pre-mixed new and seasoned plaster backgrounds, based on calk or cement. For interiors and exteriors. - Skimming of concrete-based walls. - Realization of skimmings from 2 up to 10 mm before laying of ceramic tiles. SURFACES Cementitious plaster, cement-lime mortar, brickwork, concrete, cellular concrete...

RECOMMENDED ACCESSORIES RASO should be mixed with about 5 l. of clean water per 25 kg bag (20±1%) until a homogeneous, lump-free mixture is obtained. In case of particularly smooth substrates, such as pre-casted or cast-in-place concrete, the mixture can be made with TC-LAX and water in a 1:1 ratio, to allow RASO to bond with the substrate in a better way. In all cases, it is advisable to use a low speed blender (approx. 500 rpm) since a high speed will reduce the mechanical characteristics of the product. Wait about 5 minutes, then stir the product briefly again and start applying. APPLICATION...

raso TECHNICAL SPECIFICATIONS Curing time Minimum thickness Maximum thickness White or grey powder Water used for mixing Compressive strength after 3 days Compressive strength after 28 days Bending strength after 28 days Temperature during application * these times refer to a temperature of 23°C – 50% R.H. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION The surfaces must be levelled with a cementitious based product to be mixed with water alone, that can be applied in layers up to 10 mm thick on both walls and floors, i.e. a product such as TECHNOKOLLA’s...