*myarchiexpo

kalox-plus

Product catalog summary

Main Features:
KALOX-PLUS is a monocomponent finishing plaster available in white or grey, suitable for both indoor and outdoor walls. It offers a 'fine setting coat' finish and can be applied to old plastic cladding. The product supports layers up to 6 mm thick, has low water absorption, and high bonding capacity.

Appearance and Storage:
The product is a white or grey powder and should be stored in a dry place for up to 12 months.

Fields of Use:
KALOX-PLUS is used as a leveling mortar with a float finish and can be painted, coated, or tiled over. Suitable substrates include concrete, cement-based plaster, old plastic wall cladding, plasterboard, and walls with residues of cement-based adhesives, old glass mosaic, or ceramic tiles.

Nature of the Product:
Composed of lime, cement, selected silicon/quartz mineral charges, organic copolymers, and specific additives.

Preparation and Application:
Mix KALOX-PLUS with approximately 6 liters of clean water per 25 kg bag. Apply with a smooth steel trowel, ensuring the substrate is free from dust, dirt, oil, grease, or wax. Apply two coats, each not exceeding 6 mm, and finish with a sponge trowel for a smooth surface. Use K-NET fiberglass net for layers thicker than 4 mm or non-homogeneous substrates.

Consumption:
Approximately 1.3 kg/m² per mm of thickness.

Warnings and Recommendations:

Do not apply to gypsum substrates.
Avoid use on substrates with rising damp.
Do not exceed 6 mm thickness per layer.
Do not apply at temperatures below 5°C or above 35°C.

Technical Data:
Compressive strength after 28 days is ≥15 N/mm², and bond to concrete after 28 days is ≥1 N/mm². The product has a pot life of approximately 4 hours.

Specification:
Vertical substrates should be finished with a lime and cement-based product like KALOX-PLUS, applied in layers up to 6 mm thick.

Catalog excerpts

KALOX-PLUS Highly bonding white or grey finishing plaster for indoor and outdoor walls. Float finish.

Open the catalog to page 1

kalox-plus MAIN FEATURES Monocomponent “Fine setting coat” finish Can also be applied to old plastic cladding Layers up to 6 mm thick Low water absorption High bonding capacity APPEARANCE White or grey powder STORAGE 12 months in dry place FIELDS OF USE KALOX-PLUS can be used as leveling mortar with float finish for both indoor and outdoor walls. It can be painted or coated afterwards. KALOX-PLUS can also be tiled. SUBSTRATES Concrete, cement-based plaster, old plastic wall cladding, plasterboard, walls with residues of cement-based adhesives, old glass mosaic or ceramic tiles. NATURE OF THE...

Open the catalog to page 2

RECOMMENDED ACCESSORIES HOW TO PREPARE THE MIXTURE Blend KALOX-PLUS with approximately 6 l. of clean water per 25 kg bag (24±1% white, 23±1% grey) until mixture is homogeneous and lump-free. Use blender at low speed (approx. 500 rpm). APPLICATION The surface must be free from dust and dirt. Traces of oil, grease, wax, etc., must be removed beforehand. Apply the product with a smooth steel trowel. Press the mortar well down onto the substrate to ensure a perfect bond. However, remember that on sunny days or if the substrate is very absorbent, this latter must be wetted with plenty of water to...

Open the catalog to page 3

VALUE STANDARD TECHNICAL DATA Appearance of finished product Maximum diameter of aggregate Apparent specific mass of powder (grey) Apparent specific mass of powder (white) Water required for mixing (grey) Water required for mixing (white) Apparent specific mass of fresh mortar (grey) Apparent specific mass of fresh mortar (white) Pot life FINAL PERFORMANCE Compressive strength after 28 days Bond to concrete after 28 days APPLICATION SPECIFICATIONS Consumption Minimum thickness allowed Total maximum thickness Storage Temperature during application approx. 1.3 kg/m2 per mm of thickness >1 mm 6...

Open the catalog to page 4

All TECHNOKOLLA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list