KALOX-G White skimming plaster for indoor use. Smooth finish.

MAIN FEATURES Monocomponent Smooth finish Layers up to 3 mm thick APPEARANCE White powder STORAGE 12 months in unopened pack in dry place FIELDS OF USE - Smooth finishing coat for fresh or weathered, conventional or pre-mixed lime and gypsum based plastered indoor substrates. - Smooth finishing layer for sufficiently weathered lime and gypsum based plastered indoor substrates. - Smooth surface finish for cellular concrete blocks. - Hollow gypsum blocks and plaster-board. SUBSTRATES Lime and gypsum-based plasters (fresh or weathered), lime and cement-based plasters (sufficiently weathered), cellular...

RECOMMENDED ACCESSORIES HOW TO PREPARE THE MIXTURE Blend KALOX-G with approximately 10 l. of clean water per 20 kg bag (50±1%) until mixture is homogeneous and lump-free. Use blender at low speed (approx. 500 rpm). APPLICATION OPERATIONS 437145 Blender 1200 The surface must be free from dust and dirt. Traces of oil, grease, wax, etc., must be removed beforehand. The finish should be applied to dry substrates, or with <3% humidity. Apply product with a smooth steel trowel. Press it into the substrate so as to ensure a perfect contact. It is advisable to apply the product in two or more coats up...

kalox-g TECHNICAL DATA Appearance of finished product white powder Maximum diameter of aggregate Apparent specific mass of powder Water required for mixing Apparent specific mass of fresh mortar FINAL PERFORMANCE Compressive strength after 28 days APPLICATION SPECIFICATIONS Consumption Maximum thickness per coat Total maximum thickness 12 months in unopened pack in dry place Temperature during application * these time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION Vertical substrates must be finished...