KALOX FINO White skimming plaster for indoor and outdoor use. Smooth finish.

kalox fino MAIN FEATURES Monocomponent Optimum workability Optimum bonding capacity Smooth finish APPEARANCE White powder STORAGE 12 months in dry place FIELDS OF USE - KALOX-FINO can be used as smooth finishing coat for conventional or pre-mixed new or weathered lime and cement based plastered substrates both indoors and outdoors. - Leveling concrete walls and ceilings (e.g. predalles-type pre-stressed floors). - As finishing coat for plaster-board panels. SUBSTRATES Precast concrete, cement-based plaster, cement-lime mortar, plaster-board panels. NATURE OF THE PRODUCT KALOX-FINO mainly consists...

RECOMMENDED ACCESSORIES HOW TO PREPARE THE MIXTURE Blend KALOX FINO with approximately 8.6 l of clean water per 20 Kg bag (43±1%) until mixture is homogeneous and lump-free. Use blender at low speed (approx. 500 rpm) as high speed will reduce mechanical characteristics of product. Wait about 5 minutes, then stir product briefly again and start applying. APPLICATION OPERATIONS Apply product with a smooth steel trowel. Press mortar well down onto substrate to ensure a perfect bond. Wet surface with plenty of water if it is very absorbent or in sunny weather to prevent product from drying out and...

kalox fino TECHNICAL DATA Appearance of finished product white powder Maximum diameter of aggregate Apparent specific mass of powder Water required for mixing Apparent specific mass of fresh mortar FINAL PERFORMANCE Compressive strength after 28 days APPLICATION SPECIFICATIONS Consumption Minimum thickness allowed Maximum thickness per coat 12 months in unopened pack in dry place Temperature during application * these time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION Substrates must be finished...