*myarchiexpo

Catalogs
TECHNOKOLLA
BLITZ Ver:09-12 135

BLITZ Ver:09-12 135

Product catalog summary

Main Features:
BLITZ is a ready-to-use, quick-setting cement with optimum workability, low shrinkage, and is monocomponent. It appears as a grey powder and should be stored in a dry place for up to 8 months.

Fields of Use:
BLITZ is suitable for quickly fixing window frames, junction boxes, ducts, pipes, gratings, and staff angles. It can be applied on substrates such as plaster, cement-based screeds, brickwork, and concrete.

Nature of the Product:
The product consists mainly of high-strength cements, selected silicon/quartz mineral charges, and specific additives.

Substrate Preparation:
Ensure substrates are sound, clean, stable, and thoroughly wetted before application.

Mixture Preparation:
Blend BLITZ with approximately 1 liter of clean water per 5 kg bag to create a pliable paste. Prepare small amounts due to the short workability time of approximately 2 minutes. Use cold water in high temperatures and hot water in low temperatures to maintain workability.

Application:
Thoroughly wet the surface before application. Position and bury the object in the product, ensuring strong contact with both the substrate and object. Support the object briefly to allow BLITZ to harden. For blocking small water infiltrations, prepare the necessary amount and press it into place by hand when it begins to heat and set.

Consumption:
1.8 kg/m² per liter of cavities to fill.

Warnings and Recommendations:

Prepare only the amount that can be used in 1-2 minutes.
Apply in several coats, approximately 5 minutes apart.
Do not add unauthorized substances.
Do not rework the product by adding water once it has started to set.
Do not apply at temperatures below 5°C or above 30°C.

Technical Data:

Pot life: 1-2 minutes
Sets after: 2-3 minutes
Compressive strength after 3 hours: ≥ 6 N/mm²
Compressive strength after 28 days: ≥ 24 N/mm²
Surfaces ready for use: approximately 2 hours
Application temperature: from +5°C to +30°C

Specification:
Window frames and radiator shanks should be fixed with quick-setting, non-shrinking mortar like TECHNOKOLLA’s BLITZ.

Catalog excerpts

BLITZ Ready to use, quick-setting cement. substrate preparation

Open the catalog to page 1

MAIN FEATURES Monocomponent Optimum workability Quick-setting Low shrinkage APPEARANCE Grey powder STORAGE 8 months in dry place FIELDS OF USE - For quickly fixing window frames, junction boxes, ducts, pipes, gratings, staff angles, etc. SUBSTRATES Plaster and cement-based screeds, brickwork, concrete. NATURE OF THE PRODUCT BLITZ mainly consists of high-strength cements, selected silicon/quartz mineral charges and specific additives. For further details, ask the technical office for the safety brief or download it from the web site www.technokolla.com. HOW TO PREPARE THE SUBSTRATES Conditions:...

Open the catalog to page 2

HOW TO PREPARE THE MIXTURE Blend BLITZ with approximately 1 l. of clean water per 5 kg bag (20±1%) to obtain pliable paste which can be easily applied by trowel. Since the product remains workable for a very short time (approx. 2 min.), only prepare very small amounts as the product will no longer be able to bond firmly to the substrate as it sets. Use cold water if the temperature is very high (25-30°C) to ensure the product remains workable for an acceptable period of time. If the weather is very cold (5-8°C), use hot water, otherwise the product could take a long time to set. APPLICATION The...

Open the catalog to page 3

blitz TECHNICAL DATA Sets after Compressive strength after 3 h Compressive strength after 28 days Application temperature * these time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION Window frames and radiator shanks must be fixed with quick-setting, non-shrinking mortar, such as TECHNOKOLLA’s BLITZ. Technokolla reminds you to examine the “notes” document that completes the information in this data sheet. The document can be downloaded in the pdf format from the website www.technokolla.com. The advice...

Open the catalog to page 4

All TECHNOKOLLA catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list