strip rl 80 s Adhesive sealing strip for joints and corners. APPEARANCE 10 lm rolls 40 x 40 cm pieces STORAGE In dry place, protected from sunlight and high temperatures FIELDS OF USE - Watertight treatment for corners between walls and floors, wall to wall corners and for sealing joints between special pieces, such as: gullies, drains, spot lamps, etc., for waterproofing treatments using RASOLASTIK, RASOLASTIK ADV HD and RASOGUM to be covered by ceramic tiles. APPLICATION OPERATIONS Strip RL 80 is applied straight to the substrate, which must be perfectly dry and dust-free. Special pieces are not required in corners. Just cut strip to middle and fold over. It is advisable to proceed by removing half the protective film while positioning the strip on the substrate. Corner Strip Edge After this, remove the remaining part of the protective film and then press firmly down to ensure that the strip adheres properly. Alternatively, the strip can be applied to the first coat of waterproofing product when this is perfectly dry. The second coat can be applied immediately. NATURE OF THE PRODUCT Textile part: 100% non-woven polypropylene fiber fabric. Rubber part: Butyl rubber. waterproong products

1st coat RASOGUM TECHNO-ONE 1st coat TECHNO-ONE RASOGUM SKYCOLORS 2nd coat RASOGUM SKYCOLORS 1 S T COAT RASOGUM TECHNO-ONE 2 N D COAT RA S O G U M waterproong products

strip rl 80 s TECHNICAL DATA Rubber colour Total width Adhesive rubber width Application temperature WARNINGS AND RECOMMENDATIONS - the surfaces must be clean, dry and dust-free before they can be sealed - before use, make sure that sealing strip is compatibile with the surfaces in terms of: bond and chemical compatibility - do not use on substrates subject to rising damp Technokolla reminds you to examine the “notes” document that completes the information in this data sheet. The document can be downloaded in the pdf format from the website www.technokolla.com. The advice about technical matters...