AKROSAN Highly vapour permeable lightened dehumidifying plaster for refurbishing and insulating damp masonry. Application by machine. repairing refurbishing and finishing

MAIN FEATURES No need for preliminary saline bloom inhibiting treatments Application by machine Optimum insulating capacity Lightened, ultra-low weight density Easily worked and finished Modulus of elasticity similar to that of the masonry Highly vapour permeable Eliminates surface efflorescence and mould APPEARANCE Grey powder STORAGE 12 months from the date of manufacture if stored correctly in a cool, dry place in the original sealed, undamaged package. FIELDS OF USE Treatment, refurbishing and thermal insulation of masonry subject to rising damp. Can be used both indoors and outdoors on the...

APPLICATION At least 2 coats of the product must be applied. Proceed with an initial coat of bonding mortar followed by the plaster. The bonding mortar must have a fluid consistency. After this, the plaster must be applied when the bonding mortar has set and therefore able to support the weight. Use AKROSAN in a semi-fluid consistency. It should be sprayed onto the masonry with a machine of the Putzmeister or PFT G5 type, according to the following technical parameters: indoor and outdoor substrates: 22 l/min plenum rate - indicatively 350 l/h of water in order to obtain thixotropic consistency;...

akrosan TECHNICAL DATA Density of applied product Maximum diameter of aggregate Compressive strength Spread layer Capillary absorption of water Coefficient of water vapour permeability Bond Electrical conductivity Fire reaction Dangerous substances (Hexavalent chromium) Application temperature SPECIFICATION Application to damp walls of plaster made with TECHNOKOLLA's AKROSAN, highly vapour permeable one-pack premixed plaster suitable for refurbishing masonry subject to rising damp, to be applied by machine without preliminary saline bloom inhibiting treatments in a layer at least 2 cm thick in...