bag The 15 kg much as yields as ag of a 25 kg b l nventiona co ive adhes AIRES Ultra-high efficiency (+55%), highly deformable cement-based adhesive for fixing ceramic tiles. bonding agents and adhesives

MAIN FEATURES Ultra-high efficiency Monocomponent Highly deformable Exceptional workability Frost proof No creep Extended open time APPEARANCE Grey powder STORAGE 12 months in dry place FIELDS OF USE - Fixing ceramic tiles of all types, even in large sizes, on indoor and outdoor walls and floors. - Suitable for fixing thin porcelain stoneware slabs. - Over-tiling on old ceramic tiles without use of primer. - Fixing on façades. - Laying cladding materials on electrically or water-heated screeds. SUBSTRATES Cement-based plaster, cement-lime mortar, gypsum-based plaster¹, anhydrite screeds¹, cement-based...

RECOMMENDED ACCESSORIES HOW TO PREPARE THE MIXTURE Blend AIRES with approximately 6.45 l of clean water. Blend until mixture is homogeneous and lump-free. It is advisable to use blender at low speed (approx. 500 rpm) as high speed will reduce the mechanical characteristics of the product. Wait 5-10 minutes, then stir the product briefly again before applying. The creamy paste obtained can be easily applied by trowel and possesses optimum thixotropy. WARNINGS AND RECOMMENDATIONS It is always advisable to apply two coats when laying 900 cm² tile sizes or larger. Do not apply to: - metal - old tiles...

aires TECHNICAL DATA Curing time Open time Floor tiles can be grouted Wall tiles can be grouted Adjustability time Creep on vertical wall Initial tensile strength Tensile strength after the action of heat Tensile strength after immersion in water Bond after freezing/thawing cycles Transverse deformation ° according to standard "EN 12004" * these time intervals refer to a temperature of 23°C-50% R.H.. They become shorter with higher temperatures and longer at lower temperatures. SPECIFICATION Ceramic floor and wall tiles must be fixed with class C2TE S2 cement-based powder adhesive according to...