Clean System Ryps 17 Clean System Ryps 22 Clean System Ryps 27 Clean System Ryps 22 Strong Clean System Ryps 22 Premium ■ PRODUCT SPECIFICATION: Mats are manufactured from aluminum profiles with a ryps insert. Profiles are joined using stainless steel links. Individual profiles are separated by rubber spacers. The construction allows for easy rolling of the mat for cleaning and transportation. A damping tape is adhered to the bottom of the mat. Mats are produced in nominal heights: 12 mm, 17 mm, 22 mm, and 27 mm. Gaps between profiles may vary, depending on the type of construction, within the range of 3 mm to 5 mm. The mat construction allows for mats to be made in any dimensions and shapes. The width of the mat is obtained by cutting the profiles, while its length is obtained by selecting the number of profiles and compressing the rubber spacers between them. The limit is the weight of a single mat, which should not exceed 100 kg. According to the opinion of the Building Technology Institute, the Clean System object doormat system is not a construction product and therefore is not subject to the requirements of the "Regulation of the Minister of Infrastructure on the technical conditions to be met by buildings and their location" regarding construction products.

Clean System Ryps Hygienic certificate Anti-slip property designation according to DIN 51130:2014 Fire reaction classification according to PN-EN 13501-1+A1:2010 Profile material Non-destructive static load on aluminum profile Textile insert Manufacturing process Fiber composition Fiber weight Fiber height Total mass Total thickness Material permanently antistatic BP Techem Sp. z o.o. 02-856 Warsaw Ludwinowska 17

ENTRANCE MATTING SYSTEM CLEAN SYSTEM RUBBER A [mm] B [mm] C [mm] Clean System Rubber 12 30 Clean System Rubber 17 30 Clean System Rubber 22 30 Clean System Rubber 27 31 Clean System Rubber 22 Strong 32 Clean System Rubber 27 ■ PRODUCTSPECIFICATION: Doormats Clean System Rubber are made of aluminum with Rubber insert. Profiles are coupled with stainless steel cord. Aluminum profiles are separate with rubber spacers. Construction allow us to easy roll for clearing and transporting the mat. Under aluminum profile is dumping tape. Free space between aluminum profiles can have between 3mm and 4,5mm....

Clean System Rubber Hygienic Certificate, Anti-slip norm according to DIN 51130:2014 Fire classification according to PN-EN 13501-1+A1:2010 Material of aluminum profile Stationary load Rubber Insert Insert is made of elastomer with pigments (G-grey, B-brown, B-black) Tensile strength BP Techem Sp. z o.o. 02-856 Warszawa Ludwinowska 17 FLOOR MATTING SYSTEMS

Clean System Scrub 22 Strong 32 25 3-5 Clean System Scrub 22 Premium 52 25 3-5 Doormats Clean System Scrub are made of aluminum with Scrub insert. Profiles are coupled with stainless steel cord. Aluminum profiles are separate with rubber spacers. Construction allow us to easy roll for clearing and transporting the mat. Free space between aluminum profiles can have between 3mm and 4,5mm. Construction of doormats allow us to manufacture mats in any dimensions and shapes. Width of the mat is obtained as a result of cutting the profiles and length is obtained as a result of adding aluminum profiles...

Clean System Scrub Anti-slip norm according to DIN 51130:2014 R13 Fire classification according to PN-EN 13501-1+A1:2010 Material of aluminum profile Stationary load Scrub Insert Fibres PA6.6 with thickness Brush/scrub profile with Stainless steel wire with thickness 0,7 mm According to Manufacturer Scrub insert meets the requirements of EU 2002/95/EC entered into force 01.07.2006 and it is manufactured in accordance with Directive ROHS 2002/95/EC. BP Techem Sp. z o.o. 02-856 Warszawa Ludwinowska 17

ALUMINUM FRAME COMPATIBLE WITH PROFILES ■ PRODUCT SPECIFICATION: We recommend bonding, doweling, or optionally filling the frame profiles with a self-leveling compound. The names of the structural profiles and their compatible frames are the same, and the top edges of the frame and the mat align. The width of the visible upper section is 4.5 mm. The cut frames (recommended cutting angle 45°) are joined using galvanized steel corner brackets bent at a 90° angle. The bracket is fastened with M6 threaded screws using a hex key, tightened through the holes in the bracket to the first resistance point...

ALUMINUM FRAME COMPATIBLE WITH PROFILES A [mm] B [mm] C[mm] We also offer an alternative solution with a frame designed for pouring with a self-leveling compound, which requires a higher frame according to the table—one size larger than the mat profile. In the diagram, the suggested minimum values for pouring are shown in red (using a rubber insert as an example), which may vary depending on customer preferences. A - total frame height B - mat profile height including cushioning foam C - height (thickness) of the self-leveling layer with the frame

RAMP PROFILE FOR CLEAN SYSTEM SHOE MATTING SYSTEM RAMP PROFILE USED WITH PROFILES ■ PRODUCT SPECIFICATION: The ramp profile for the Clean System object wiper system is manufactured from 4 m long aluminium sections. The profile elements are cut and bolted together using steel linear or angle fasteners. The dimension A of the ramp profile depends on the height of the mat for which it is to be used (see table). BP Techem Sp. z o.o. 02-856 Warszawa Ludwinowska 17

FLOOR MATTING SYSTEMS ■ PRODUCT SPECIFICATION: Doormats are manufactured from aluminum profiles with textile inserts. The profiles are joined together using a rubber connector, which also serves as a shock absorber between the mat and the floor surface or recess. The design allows for easy rolling of the mat for cleaning and transportation. The aluminum profile of the Clean System Wide mat has a height of 7.7 mm. The height of the profile with the textile insert is 11 mm. The mat's design allows for customization in various dimensions and shapes. The width of the mat is achieved by cutting the...