Clean System Ryps 17 Clean System Ryps 22 Clean System Ryps 27 Clean System Ryps 22 Strong Clean System Ryps 22 Premium ■ PRODUCT SPECIFICATION: Mats are manufactured from aluminum profiles with a ryps insert. Profiles are joined using stainless steel links. Individual profiles are separated by rubber spacers. The construction allows for easy rolling of the mat for cleaning and transportation. A damping tape is adhered to the bottom of the mat. Mats are produced in nominal heights: 12 mm, 17 mm, 22 mm, and 27 mm. Gaps between profiles may vary, depending on the type of construction, within the range of 3 mm to 5 mm. The mat construction allows for mats to be made in any dimensions and shapes. The width of the mat is obtained by cutting the profiles, while its length is obtained by selecting the number of profiles and compressing the rubber spacers between them. The limit is the weight of a single mat, which should not exceed 100 kg. According to the opinion of the Building Technology Institute, the Clean System object doormat system is not a construction product and therefore is not subject to the requirements of the "Regulation of the Minister of Infrastructure on the technical conditions to be met by buildings and their location" regarding construction products.

Clean System Ryps Hygienic certificate Anti-slip property designation according to DIN 51130:2014 Fire reaction classification according to PN-EN 13501-1+A1:2010 Profile material Non-destructive static load on aluminum profile Textile insert Manufacturing process Fiber composition Fiber weight Fiber height Total mass Total thickness Material permanently antistatic BP Techem Sp. z o.o. 02-856 Warsaw Ludwinowska 17