Tecanno technical data vent Square
2Pages

TECHNICAL DATA VENT SQUARE 100 SURFACE-MOUNTED AIR VENT FOR SUPPLY AND EXHAUST AIR DESCRIPTION  Surface-mounted air vent for supply and exhaust air, for flexible use in all interior spaces  Installation on ceilings and walls  Suitable for use as an air diffuser  Even air distribution  Front plate with a 5 x 5 mm perforation diameter  100 percent free cross section for DN 100 air ducts  Combination option with tecanno inserts for air regulation and filtration  Protected design patent, handcrafted in Germany  Made of sheet steel with electrostatic powder coating (RAL colour 9016-20, layer thickness approx. 60 µm) TECHNICAL DATA Front view Back view Side view Sheet steel with electrostatic powder coating 9016-20 layer thickness approx. 60 µm VOLUME FLOW REGULATOR FILTER INSERT VOLUME FLOW REGULATOR 100 TENDER SPECIFICATION Tecanno air vent SQUARE 100 for supply and exhaust air in designtype construction. For installation on ceilings and walls via 100 mm connecting pieces. 100 percent freely usable cross section. Can be combined with VOLUME FLOW REGULATOR or FILTER INSERT from Tecanno. Uniform grid layout of 5 x 5 mm diffuser openings. Vent made of sheet steel with electrostatic powder coating (RAL 9016-20). Handcrafted in Germany. Registered design patent. Manufacturer: Tecanno Type: Vent SQUARE 100 Dimensions L x W x H (mm): 160 x 160 x 10 Item No.: 0011100-9016-20 To supplement the air vents, we provide inserts for air regulation or air filtration.  VOLUME FLOW REGULATOR: For supply or exhaust air. The VOLUME FLOW REGULATOR for air regulation can be combined with a filter (Item: REPLACEMENT FILTER) to allow exhaust air regulation.  FILTER INSERT: For exhaust air. FILTER INSERT cannot be regulated.  REPLACEMENT FILTER: 5 filters for use in the VOLUME FLOW REGULATOR or FILTER INSERT. The air vent has a 100 percent freely usable cross-section that accepts a VOLUME FLOW REGULATOR or FILTER INSERT. The VOLUME FLOW REGULATOR can be combined with a filter. Adding a VOLUME FLOW REGULATOR to the air vent allows the air flow rate to be regulated. This facilitates a variety of acoustic data and pressure reductions. For exhaust air filtration, the FILTER INSERT is ideal. The accessories can be inserted into the vent connecting piece separately. The flush cover hides the system and ensures a consistently slim design. More information under »Acoustic data and pressure reductions« and on the relevant accessories’ data sheets. ORDERING INFORMATION Vent SQUARE 100 (Item No. 0011100-9016-20) Accessories*: VOLUME FLOW REGULATOR 100 (Item No. 10100) or FILTER INSERT 100 (Item No. 20100) * The accessory (VOLUME FLOW REGULATOR and FILTER INSERT) is not included in the scope of delivery. Accessories, if required, must be ordered separately. Accessories, if required, must be ordered separately. For more information and data, visit our website: www.tecanno.de. Subject to errors and modifications. All rights reserved © Tecanno GmbH. Prices and conditions

DEFINITIONS Vol in m³/h: Volume flow rate per air vent o: Volume flow regulator opening degree in % Δp in Pa: Total pressure loss LWA in dB(A): A-weighted sound power level ACOUSTIC DATA AND PRESSURE REDUCTIONS VENT SQUARE 100 SOUND POWER LEVEL / PRESSURE REDUCTION The flow rate is set by turning the volume flow regulator (o = degree of opening), which can be inserted into the vent connecting piece as required. Alternatively, the filter insert serves as a dust filter. Without any insert, the valve has a freely usable cross section. The volume flow regulator can be combined with a filter....