1. Catalogs
  2. Tecanno GmbH
  3. Tecanno technical data vent frame

Tecanno technical data vent frame

Tecanno technical data vent frame

Tecanno technical data vent frame

Product catalog summary
Product Overview:
The Tecanno Vent Frame 100 is a versatile air vent suitable for both supply and exhaust air applications, designed for ceiling and wall installations. It comes in three finishes: glass white, glass black, and brushed stainless steel, each with a 30mm wide frame and a 100% free cross-section for DN 100 air ducts. The design is patented and handcrafted in Germany.
Technical Specifications:
  • Dimensions: 220 x 220 x 14 mm
  • Connecting Piece Diameter: 99 mm
  • Weight: 600 g (glass variants), 1,250 g (stainless steel)
  • Front Material: White glass, black glass, or brushed stainless steel
  • Base Material: Sheet steel with electrostatic powder coating (RAL 9016-20 for glass white, RAL 9005-20 for others)
Configuration and Accessories:
The vent can be enhanced with a Volume Flow Regulator or a Filter Insert, which must be ordered separately. The regulator allows for airflow adjustments and can be combined with a filter for exhaust air regulation, while the filter insert is used for exhaust air filtration.
Acoustic Data and Pressure Reductions:
Performance optimization is possible by adjusting the Volume Flow Regulator. Acoustic data and pressure reductions vary, with sound power levels ranging from 25 to 35 dB(A) depending on the setup.
Ordering Information:
  • Vent Frame 100, Glass White: Item No. 0031100-9016-20
  • Vent Frame 100, Glass Black: Item No. 0032100-9005-20
  • Vent Frame 100, Brushed Stainless Steel: Item No. 0033100-9005-20
  • Volume Flow Regulator 100: Item No. 10100
  • Filter Insert 100: Item No. 20100
  • Replacement Filter (5x): Item No. 30100
Sound Power Level / Pressure Reduction: The document details the use of a volume flow regulator for adjusting flow rate, which can be used alone or with a filter insert. Without inserts, the valve allows a freely usable cross-section.
Trajectory Length: The trajectory length (l0,2) is the distance where air speed reduces to 0.2 m/s. Recommended installation distances for supply air are 1 meter from ceiling corners and 0.3 meters from wall corners, with no minimum distance for exhaust air.
Data Summary: Diagrams show total pressure loss (Δp) in Pascals and trajectory length (l0,2) in meters, plotted against volume flow rate (Vol) in cubic meters per hour (m3/h). Sound power levels are indicated in decibels (dB) for different configurations, with values such as 35 dB, 30 dB, and 25 dB noted for both supply and exhaust air scenarios.
See more

Catalog excerpts

Tecanno technical data vent frame-1

TECHNICAL DATA VENT FRAME 100, glass white SURFACE-MOUNTED AIR VENT FOR SUPPLY AND EXHAUST AIR DESCRIPTION  Surface-mounted air vent for supply and exhaust air, for flexible use in all interior spaces  30 millimeter wide vent frame  Installation on ceilings and walls  100 percent free cross section for DN 100 air ducts  Combination option with tecanno inserts for air regulation and filtration  Flush cover guarantees unchanging design  Symmetrical, flow-optimised passage of air  Protected design patent, handcrafted in Germany  Front made of white glass; base plate made of sheet steel with electrostatic powder coating (RAL colour 9016-20, layer thickness approx. 60 μm) TECHNICAL DATA Vent FRAME 100, glass white Front material White glass Sheet steel with electrostatic powder coating 9016-20 layer thickness approx. 60 µm VOLUME FLOW REGULATOR FILTER INSERT Accessories, if required, must be ordered separately. Front view Back view Side view VOLUME FLOW REGULATOR 100 TENDER SPECIFICATION Tecanno air vent FRAME 100, glass white, for supply and exhaust air in design-type construction. For installation on ceilings and walls via 100 mm connecting pieces. 100 percent freely usable cross section. Can be combined with VOLUME FLOW REGULATOR or FILTER INSERT from Tecanno. The flush cover ensures a consistently slim design with a symmetrical, flow-optimized air throughput. Front made of white glass; base plate made of sheet steel with electrostatic powder coating (RAL 9016-20). Handcrafted in Germany. Registered design patent. Manufacturer: Tecanno Type: Vent FRAME 100, glass white Dimensions L x W x H (mm): 220 x 220 x 14 Item No.: 0031100-9016-20 To supplement the air vents, we provide inserts for air regulation or air filtration.  VOLUME FLOW REGULATOR: For supply or exhaust air. The VOLUME FLOW REGULATOR for air regulation can be combined with a filter (Item: REPLACEMENT FILTER) to allow exhaust air regulation.  FILTER INSERT: For exhaust air. FILTER INSERT cannot be regulated.  REPLACEMENT FILTER: 5 filters for use in the VOLUME FLOW REGULATOR or FILTER INSERT. ORDERING INFORMATION The air vent has a 100 percent freely usable cross-section that accepts a VOLUME FLOW REGULATOR or FILTER INSERT. The VOLUME FLOW REGULATOR can be combined with a filter. Adding a VOLUME FLOW REGULATOR to the air vent allows the air flow rate to be regulated. This facilitates a variety of acoustic data and pressure reductions. For exhaust air filtration, the FILTER INSERT is ideal. The accessories can be inserted into the vent connecting piece separately. The flush cover hides the system and ensures a consistently slim design. For more information and data, visit our website: www.tecanno.de. Subject to errors and modifications. All rights reserved © Tecanno GmbH. Prices and conditions upon request. More information under »Acoustic data and pressure reductions« and on the relevant accessories’ data sheets. Vent FRAME 100, glass white (Item No. 0031100-9016-20) Accessories*: VOLUME FLOW REGULATOR 100 (Item No. 10100) or FILTER INSERT 100 (Item No. 20100) * The accessory (VOLUME FLOW REGULATOR and FILTER INSERT) is not included in the scope of delivery. Accessories, if required, must be ordere

 Open the catalog to page 1
Tecanno technical data vent frame-2

DEFINITIONS Vol in m³/h: Volume flow rate per air vent o: Volume flow regulator opening degree in % Δp in Pa: Total pressure loss LWA in dB(A): A-weighted sound power level ACOUSTIC DATA AND PRESSURE REDUCTIONS VENT FRAME 100, glass white TRAJECTORY LENGTH The flow rate is set by turning the volume flow regulator (o = degree of opening), which can be inserted into the vent connecting piece as required. Alternatively, the filter insert serves as a dust filter. Without any insert, the valve has a freely usable cross section. The volume flow regulator can be combined with a filter. The trajectory...

 Open the catalog to page 2
Tecanno technical data vent frame-3

TECHNICAL DATA VENT FRAME 100, glass black SURFACE-MOUNTED AIR VENT FOR SUPPLY AND EXHAUST AIR DESCRIPTION  Surface-mounted air vent for supply and exhaust air, for flexible use in all interior spaces  30 millimeter wide vent frame  Installation on ceilings and walls  100 percent free cross section for DN 100 air ducts  Combination option with tecanno inserts for air regulation and filtration  Flush cover guarantees unchanging design  Symmetrical, flow-optimised passage of air  Protected design patent, handcrafted in Germany  Front made of white glass; base plate made of sheet steel...

 Open the catalog to page 3
Tecanno technical data vent frame-4

DEFINITIONS Vol in m³/h: Volume flow rate per air vent o: Volume flow regulator opening degree in % Δp in Pa: Total pressure loss LWA in dB(A): A-weighted sound power level ACOUSTIC DATA AND PRESSURE REDUCTIONS VENT FRAME 100, glass black TRAJECTORY LENGTH The flow rate is set by turning the volume flow regulator (o = degree of opening), which can be inserted into the vent connecting piece as required. Alternatively, the filter insert serves as a dust filter. Without any insert, the valve has a freely usable cross section. The volume flow regulator can be combined with a filter. The trajectory...

 Open the catalog to page 4
Tecanno technical data vent frame-5

TECHNICAL DATA VENT FRAME 100, brushed stainless steel SURFACE-MOUNTED AIR VENT FOR SUPPLY AND EXHAUST AIR DESCRIPTION  Surface-mounted air vent for supply and exhaust air, for flexible use in all interior spaces  30 millimeter wide vent frame  Installation on ceilings and walls  100 percent free cross section for DN 100 air ducts  Combination option with tecanno inserts for air regulation and filtration  Flush cover guarantees unchanging design  Symmetrical, flow-optimised passage of air  Protected design patent, handcrafted in Germany  Front made of brushed stainless steel; base plate...

 Open the catalog to page 5
Tecanno technical data vent frame-6

DEFINITIONS Vol in m³/h: Volume flow rate per air vent o: Volume flow regulator opening degree in % Δp in Pa: Total pressure loss LWA in dB(A): A-weighted sound power level ACOUSTIC DATA AND PRESSURE REDUCTIONS VENT FRAME 100, brushed stainless steel TRAJECTORY LENGTH The flow rate is set by turning the volume flow regulator (o = degree of opening), which can be inserted into the vent connecting piece as required. Alternatively, the filter insert serves as a dust filter. Without any insert, the valve has a freely usable cross section. The volume flow regulator can be combined with a filter. The...

 Open the catalog to page 6
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.