Strongbox® 235 product guide Hollow sections

Introduction Technical data Size range charts Bundle configuration

Strongbox® 235 Product Guide Strongbox® 235 is a cold formed, low grade hollow section manufactured to high quality standards. Strongbox® 235 key features: • Excellent quality, made with steel from a high quality production process • Minimum strength of 235 MPa • High levels of formability and, because the steel is fully-killed, excellent weldability • Product subject to non-specific inspection and testing; with test report supplied • Excellent consistent dimensional tolerances • Excellent supply availability through approved stockholders • Suitable for

Strongbox® 235 Product Guide Technical data TECHNICAL DATA Cold formed hollow sections suitable for use in multi-purpose applications of a non-critical nature. Strongbox® 235 hollow sections are supplied with a minimum yield strength of 235 N/mm2 and fully comply with the European Standard for cold formed hollow sections EN10219 S235JRH. Mechanical properties Yield strength ReH min N/mm2 235 Strongbox® 235 is produced from fully-killed steel – critical to formability and weldability. Testing Strongbox®235 hollow sections EN10219 S235JRH are subject to non-specific inspection and testing and are...

Strongbox® 235 Square Hollow Sections – length and tolerances Size Standard mill length Special mill lengths Strongbox® 235 Rectangular Hollow Sections – length and tolerances Size Standard mill length Special mill lengths Strongbox® 235 Circular Hollow Sections – length and tolerances Outside diameter Standard mill length Special mill lengths

Strongbox® 235 Product Guide Size range charts SIZE RANGE CHARTS Strongbox® 235 Circular Hollow Sections Strongbox® 235 Square Hollow Sections Size (mm) • Minimum order quantities may apply to some sizes. • Other sizes can be manufactured – please consult us. S

Strongbox® 235 Rectangular Hollow Sections • Minimum order quantities may apply to some sizes. • Other sizes can be manufactured – please consult us. S

Strongbox® 235 Product Guide Bundle configuration BUNDLE CONFIGURATION Strongbox® 235 Circular Hollow Sections Size Number of lengths per bundle uti 10m

Strongbox® 235 Square Hollow Sections Size Number of lengths per bundle

Strongbox® 235 Product Guide Bundle configuration Strongbox® 235 Rectangular Hollow Sections Size Number of lengths per bundle

While care has been taken to ensure that the information contained in this brochure is accurate, neither Tata Steel Europe Limited, nor its subsidiaries, accept responsibility or liability for errors or for information which is found to be misleading. Copyright 2010 Tata Steel Europe Limited Tata Steel PO Box 101 Weldon Road Corby Northants NN17 5UA United Kingdom T: +44 (0)1536 402121 F: +44 (0)1536 404836 [email protected] English Language TST07:500:UK:11/2010