siisif SOPHISTICATED. ELEGANT. MONTALINE®. CLADDING PROFILES IN STEEL AND ALUMINIUM NEW: with MONTALINE® SOLAR-module

CAN A FACADE LOOK MORE EXPENSIVE THAN IT IS? MONTALINE® cladding profiles provide the basis for an elegant faSade on which no fasteners can be seen. MONTALINE® cladding pr°files are also available with double-sided bended ends. Tins gives the fagade the character of a high-priced flat panel fagade. The various overall widths up to 400 mm and the use of glass elements combined with metal or concave/convex rounded MONTALINE® profiles produce interesting design possibilities for architects and planners. With their sophisticated design, with or without joints, and hidden fastening system, MONTALINE® profiles...

CONTENTS • M°NTALINE® CLADDING PROFILES IN STEEL AND ALUMINIUM Dimensions and precise descriptions • MONTALINE® SYSTEM ELEMENTS Detailed information • RECOMMENDATIONS from storage to fitting Detailed information and tolerances • MONTANA REFERENCES Office and administration building, Cessna. (I) back page • Lehner Versand AG, Schenkon (CH)

CLADDING PROFILES IN STEEL AND ALUMINIUM With hidden fasteners, smooth visible side, with microprofilation on request STEEL • • • ALUMINIUM • • ALUMINIUM • • STEEL • • • STEEL • • • • ML F-K PROFILE WITH OPEN JOINT AND DOUBLE-SIDED BENDED ENDS Perforated finish only in aluminium and on request STEEL • • • STEEL • • •

SYSTEM ELEMENTS MONTALINE SYSTEM ELEMENTS MONTALINE® Solar MONTALINE® SOLAR – the sustainable and, at the same time, aesthetic addition to the MONTALINE® system. MONTALINE® SOLAR is easily hooked onto the holders of the MONTAFIX® securing system by means of the appropriately formed suspension device and can be combined with ML 26/400 F in steel or aluminium. Finish with open joint only. The tempered and toughened solar glass has a nano-coated surface with a self-cleaning effect and an especially high level of light transmission. The high-quality solar cells with cell efficiency of 17.7% produce...

Fitting recommendations Checks before commencement of fitting The condition of the substructure must be checked before laying the construction elements with regard to even surface, right angles, necessary support widths, etc. If there are any defects or faults that make fitting difficult or even impossible, the customer/principal must be notified in writing with a request for rectification of the same. Unloading, handling and further transportation on the construction site should only be carried out using lifting straps so as to protect the organic coatings. ML G are profiles with closed joints,...

SERVICE ELEMENTS RELATING TO MONTALINE® STANDARD FINISH Smooth surface with microprofilation on request. STANDARD MATERIAL ex stock (see our delivery programme on the MONTACOLOR® colour chart) SPECIAL PURCHASING Minimum order quantities: Steel 7000 kg / Aluminium 2000 kg mr _► Homepage www.montana-ag.ch With additional product information and references a You can download these. LENGTH RECOMMENDATION Steel: 4.0 m-max. 6.0 m Aluminium: 4.0 m-max. 5.0 m / Perforated finish max. 4.0 m TOLERANCES Lengths up to 4 m: ±2 mm Lengths over 4 m up to 6 m: ±3 mm For details, see limit dimensions...

MONTANA BAUSYSTEME AG – THE SWISS COMPANY WITH INTERNATIONAL REFERENCES IN INDUSTRIAL, COMMERCIAL, ADMINISTRATIVE AND RESIDENTIAL CONSTRUCTION Montana Bausysteme AG has become a byword for innovative construction solutions among planners and architects. Years of experience, a broad product range, high flexibility and the resources of a multinational group make Montana a top supplier of international calibre. Architects acknowledged worldwide use products from Montana Bausysteme AG to match visual creativity with technical requirements. In addition to the products presented in this brochure, we...