Overview

This document provides detailed technical specifications, variants, dimensions, and operational modes for aluminium movable and fixed brise soleil (solar shading louvers). It covers large format blades designed for architectural applications to control solar gain and enhance building energy efficiency.

Product Variants and Types

• Movable Blades (Lamas Orientables): Available in symmetric and asymmetric variants, designed to adjust solar shading dynamically.
• Fixed Blades (Lamas Fijas): Continuous fixed blades for static shading solutions.
• Large Format Blades: Various profiles such as Lip.150, Lip.200, Lip.250, Lip.300, Lip.350, Lip.400, ASM series (ASM.250, ASM.300A/B, ASM.350A/B), SM series (SM.200, SM.300, SM.400A/B), SPF series, and Box.200M.

Key Dimensions and Profiles

The document lists main dimensions (A, B, C, I, P, F, H) for each blade model, including overlap standards. For example:

• Lip.150: 150 mm width, with detailed dimensional parameters.
• ASM.250 to ASM.350B: Widths from 250 mm to 350 mm with corresponding height and overlap values.
• Box.200M: Fixed blade with 200 mm width and specific structural properties.

Structural Properties and Load Capacities

Moment of inertia values (Ixx and Iyy in cm4) are provided for each blade type, indicating structural stiffness. Maximum recommended blade lengths are specified under different wind pressure conditions (600 Pa, 800 Pa, 1250 Pa) for both horizontal and vertical blade positions. For example:

• Lip.150: Maximum lengths range from 2400 mm to 3100 mm depending on pressure and orientation.
• ASM.300B: Maximum lengths up to 3700 mm under 1250 Pa.
• SM.400B: Maximum lengths up to 3750 mm under 1250 Pa.

Operation Modes

Brise soleil blades can be operated manually, mechanically, or by motorized systems, allowing flexibility in control depending on building requirements.

Accessories and Components

• Axes (EFJ), circlips (8mm & 12mm), endplates (4mm aluminium), bearing supports, and kneecaps for blade pivoting and assembly.
• Fixed and movable blade options with compatible mounting and drive components.

Assembly and Installation

Instructions and references for system assembly and blade installation are included, emphasizing correct positioning and structural integration with mullions and drive bars.

Applications and Case Studies

• Examples of installations in sports halls, universities, and fireman schools in Spain, demonstrating practical use of various blade models (e.g., Lip.300, ASM.350, Lip.400).

Summary of Critical Parameters

• Blade Widths: Range from 150 mm to 400 mm depending on model.
• Maximum Blade Lengths: Vary by model and wind pressure, up to approximately 5400 mm for some models.
• Structural Stiffness: Provided by Ixx and Iyy values, critical for design under wind loads.
• Operation: Manual, mechanical, or motorized actuation options.
• Accessories: Essential for assembly and maintenance.

Recommendations and Best Practices

• Select blade size and variant based on architectural requirements and environmental loads.
• Ensure correct overlap and positioning for optimal shading and structural performance.
• Choose appropriate operation mode for user convenience and building automation integration.
• Use specified accessories to guarantee durability and ease of maintenance.